Question about JVC AV-48WP30 48" Rear Projection Television

1 Answer

Convergence problem wiht jvc av 48wp30

I have a jvc av 48wp30 rear projection screen television.
About 5 months ago the convergence went out so I had a tech come out and replace the convergence IC's, he used two stk 392 110's.
A week ago ago the screen got an hourglass shape with the top and bottom screen bowing badly coupled with double vision look on screen.
I used the remote to attempt to adjust the convergence but although I could ge the arrows to move, i was unable to get the arrows to move far enough to get them lined up properly. Then just a few days ago after the set had been on for about 10 minutes it made a popping sound and the screen went dark. The blue power light continued flashing so i unplugged the set.
I ordered two more of the stk 392 110 convegence ic's online and received today. I carefully removed the old IC's and very meticulously reinstalled the new IC's. I even used a magnifying glass to make sure all new solders were secure.
The screen now lights up but i still have the convergence problem and when i attempt the use the remote to adjust the convergence the arrows won't move at all.
I have looked online to try to remedy the situation but have not found anyone with these exact circumstances. I am not a techie by any stretch of the imagination so in laymans terms can someone advise me on what they think the problem may be?

Any help would be greatly appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 3,459 Answers

Bad chips...There are a ton of cheap fakes out there....Or bad resistor...

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Example Photo:
Convergence problem wiht jvc av 48wp30 - 5f6e85c.jpg
Problem #2 CRT Fluid has clouded over.

Symptoms


  • Dull Video, Washed out
  • White/Bright looking video
  • Halos around objects
  • Red/Orange looking
Example Photo:
ee1ca68.jpg

You can see more examples and find a fixConvergence problem wiht jvc av 48wp30 - bb0cf99.png />
bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Mar 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a user manual for jvc hr s 5900


Try Googling (jvc)(hr s 5900)(manual) without parens.

Jan 09, 2017 | JVC Televison & Video

1 Answer

Toshiba 50A61rear projection colorstream TV. Went into sleep cycle with DVD player and don't hAve factory remote. Just sound no pic


Without a remote control, you can do nothing with this selection. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
If you wish to get further advice over phone; visit https://www.6ya.com/

Jan 09, 2017 | Toshiba Televison & Video

1 Answer

We have a jvc RM -C3400 tv which my kids key locked. My remote is broken is there any way I can unlock without a remote? If so how. Thanks


Without a remote control, you can't unlock it by using the front panel controls. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 06, 2017 | JVC Televison & Video

1 Answer

When playing commercial DVD's, my DR-MV150B starts to stall. It stops with the picture on the televsion screen, but can't see the rest of the movie. Any thoughts? The disc does eject.


Try cleaning the laser with a bud, if not it's either the spindle motor or laser assembly,
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | JVC DR-MV150B DVD Recorder/VCR

1 Answer

Replaced convergence on toshiba 42HDX82...put back together now no picture or sound...could i have rehooked up wires wrong?


YES YOU COULLD HAVE WRONGLY HOOKED UP THE WIRES AND TANGLED THEM UP WHICH IS CAUSING THIS TO HAPPEN BECAUSE ITS CAUSING THE THE VOLTAGE THE TO ENTER AND CAUSING THIS TO HAPPEN

Nov 30, 2016 | Toshiba 42HDX82 42" Rear Projection...

1 Answer

I recently got a 51h83 toshiba tv. When i try to hook up my xbox 360 with the hd component cables in the back i get sound but no video. Please help.


WITH THE TOSHIBA 51H83TOSHIBA TV YOU CANT HOOK UP HD CABLES TO THAT SPECIFIC TV FROM YOUR XBOX 360 BECAUSE THE DEVICE ISNT EQUIPPED WITH THAT CAPABILITY

Nov 16, 2016 | Toshiba 51H83 51" Rear Projection...

1 Answer

How can I fix blue dots on my Sony TV screen?


Seems like a problem with a lot of Sony TV's. Wish i could be of more help, but check this site. Your not alone! Sony LCD Rear Projection TV Problems hope this helps!

May 23, 2014 | Televison & Video

1 Answer

Do a 2001 GE projection tv have a lamp in it?


Yes course there is a lamp . You can order one from ebay for around $10 .

Apr 21, 2014 | Televison & Video

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...