Question about Frigidaire Dryers

2 Answers

Frigidaire Affinity Dryer (model LEQ7000ES0) error code E68... Continues to pop-up and shut dryer off. Can you assist in resolving this issue?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The start button is wedged in the control panel... make sure that you just press these lightly...

Posted on Dec 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Right now i took the whole bottom apart from the main brain and so far is working good is not turning off now it may work on your too

Posted on Jun 22, 2009

  • ccreyes1130 Jun 22, 2009

    i press the bottom 4 times after i did that so i can get use to it and its working first is going to apper the error sign but keep canceling and press start

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need help my affinity dryer has the code E68 on it and the code Dr the model number is LGQ7000ES0


E68 is a stuck button error code... There is a diagnostic video for this on YouTube. You will have to get a new control board to fix the problem because the buttons are part of the board... Frigidaire Dryer Main Control Board 134557200

Jun 08, 2016 | Dryers

2 Answers

Dryer shuts off after 5 seconds then beeps 3 times


Check the thermal cut off, the cycling and the hi limit thermostats.
For continuity or OHMS. If no ohms or resistance they need replacement.

Lastly check your moister sensor. ( located inside the dryer door usually) Especially if machine seems to shut down early and clothes are still wet.
Test with a meter at room temperature and it should show continuity.
A failed moisture sensor will affect the dryer run time in the automatic moisture sensing cycle but it will not affect the heating of the dryer or the timed cycle.

Apr 03, 2015 | Frigidaire FARE1011MW Affinity High...

1 Answer

Frigidaire affinity dryer error 68 and hot to touch


Hey friend, thank you for allowing me to assist you!

I understand that you are getting an E68 error code on your Frigidaire Affinity dryer, it usually stands for a key (button) that is stuck closed (active). Let's try entering a "Function Test Mode" and perform the Key Test to determine which button could be the problem. To perform "Function Test Mode": Press and hold START and the CANCEL button at the same time for 10 seconds. The key that is stuck should blink. Free the key and perform the test again. If the button is free but the error code still exists, the electronic control will more than likely need to be replaced after it has been properly diagnosed by a professional. If you need help in contacting a technician you can view the manufacturer website to find available technicians in your area. Hope this is helpful. -Matt

Jul 26, 2014 | Dryers

1 Answer

Frigidaire affinity LEQ6000ES2 error code e68...dryer will not start


Good Afternoon David,

I understand that your Frigidaire Affinity dryer, model# LEQ6000ES2, is showing you an error code of E68 and will not start. I also see that you have changed the thermal limiter. Looking at what the E68 error code means, a key or button stuck, there could be something else causing the code to come up. I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your appliance, determine what is causing the E68, and repair your dryer. Hope this is helpful.

-Best Regards-
WP

Jul 04, 2014 | Frigidaire Dryers

1 Answer

Clear codes for affinity dryer


Hi Friend, this is Z. I am happy to assist you!

I see that you have a Frigidaire Affinity dryer and I'm presuming you are seeking information on how to clear error codes on your dryer. May I please have your model number? The serial tag, which lists your model number, is typically located on the upper front, as you open the door. With this information I can help pinpoint the exact problem. In the meantime, you can reset your dryer by either unplugging your dryer or flipping off the breaker for roughly ten minutes. This often clears most false error codes. Hope this helps!

May 21, 2014 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

1 Answer

I have a Frigidaire Affinity Clothes dryer manufactured in 05/07 that is displaying a code E68 after in runs for just a few minutes. Any idea what could be causing this?


The error code E68 means a key or button is stuck. Check the buttons by pressing them one at a time to find the stuck one or enter the service diagnostic mode then the key function test. Click on the link below for the detailed instructions.

Troubleshooting Error Code E68 on Frigidaire Affinity and Gallery Dryers

Mar 06, 2011 | Frigidaire Electric Dryer

1 Answer

How do i fix an e68 fridgidaire problem on an affinity model


A key is stuck as indicated by the error code E68; enter the service diagnostic mode and perform the key test to determine which key is stuck. Unstuck the key then perform the key test again. The electronic control board (part number 134557201) needs to be replaced if the error code continues to appear. Click here for the diagnostic and key test procedure.

Apr 28, 2010 | Frigidaire AEQ6000ES Electric Dryer

1 Answer

Frigidaire Affinity Electric dryer E68 error. dries clothes fine, then error light comes on later- after dryer has been off. Will not start unless unplugged for period of time.


this is a fault code that means there is a stuck key on the board you may have to remove the control panel and check the keys if this does not work you may have to replace the panel or control board

Sep 15, 2009 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

2 Answers

Error code E4A on my frigidaire affinity dryer


This is a board communication problem, you need to replace the control board. If you send me the model # I can tell you what the part number and price would be.
Mike Anderson
Anderson Appliance Repair
(865)945-3808



Dec 02, 2008 | Frigidaire Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

923 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...