Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

2 Answers

Filling up won't stop

Washing machine wont stop filling up

Posted by on

  • simonmichael Sep 28, 2008

    Washing machine wont stop filling up

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

The reson why it won't stop filling up , is that the level float is malfuntioning. this could be because it is stuck in the down position or the micro switch itself is bad this should be looked at and if it's not the float itself then replace the microswitch... please rate this.......thanks

Posted on Sep 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi. thanks for the question .if the water would only shut off ,by turning off the water .replace the water valve thanks the appliance doc

Posted on Sep 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore series 80 model 110 wont stop filling!


There is a clear plastic hose that runs from the load selection switch to the side of the washer drum. This hose connects the fill sensor to the load switch. without it being in good condition and connected properly the washer won,t get a signal that it's full.

May 09, 2013 | Kenmore Washing Machines

1 Answer

My samsung top loader washing machine sw65v9w won't stop filling with water


If the water stops when you stop the cycle, then the pressure sensor is at fault. If you need to turn the water supply off to stop it, then the water inlet valve is at fault.

Nov 04, 2012 | Washing Machines

1 Answer

Kenmore washer model #111092581200 won't stop filling and won't agitate


Please recheck that model number. It is coming up as a microwave.

Oct 31, 2012 | Washing Machines

1 Answer

Washing machine won't fill. i filled it by hand with water, it won't agitate either, only spins.


The inlet solenoid is probably bad. And it won't agitate unless it fills and stops filling automatically.

May 17, 2012 | Whirlpool Washing Machines

1 Answer

Washing machine stopped working. The lights come on but water wont start filling


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Aug 25, 2011 | Washing Machines

1 Answer

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...


Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch.

Aug 20, 2011 | Washing Machines

1 Answer

Washing machine starts filling then wont go any


there are a lot of questions of a simular nature check the diaphram switch this controls how much water is taken in and wont progress until the switch says so what you dont say is if the machine keeps filling or stops filling and wont progress

Jan 16, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Washer wont stop filling even when its washing. GE


Replace water inlet valve, it's stuck open. You may try removing hoses to valve and see if something is holding it open

Jun 29, 2009 | Washing Machines

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...