Question about Canon iR 2016i Black and White Copier
The most common cause for E100 is the drum unit. At the rear of the drum unit should be a small peg pointing into the machine. This gets broken off. It's purpose is to opperate a laser cut off shield when the drum is removed so to prevent laser exposure. If peg is missing laser will not be detected by the system and give E100. Can be repaired or will require a new drum if it has done more than 40 to 60K copies.
Posted on Sep 29, 2008
E100 0000 BD detection PCB failureThe BD detection PCB is faulty. - Check the connector of the BD detection PCB.- Replace the laser scanner unit.- Replace the DC controller PCB.
Posted on Dec 14, 2011
Tips for a great answer:
Jun 27, 2016 | Canon IR 3300 Digital Copier
Dec 14, 2011 | Canon Printers & Copiers
Oct 11, 2010 | Canon imageRUNNER 1310 Printer
Oct 25, 2009 | Canon imageRUNNER 1600 Laser Printer
Jun 02, 2009 | Canon iR 2020i Laser Printer
288 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: