Question about Maytag Washing Machines

1 Answer

Washing machine over flows model LA305 - Maytag Washing Machines

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi thanks for the question do you stop the water by turning off the taps if that's the only way you can stop the water .replace the water valve but if you cut the power and it stops filling the valve is ok then i would look at the water level switch thanks the appliance doc

Posted on Sep 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FP Model GW611 Washing Machine intermittent & slow water flow into bowl then machine times out or errors. Removed inlet flow restrictors, fan on pump turns freely?


valves are wearing out and need to be replaced. they are located behind the top board where the hoses plug in. turn off water when removing valve tops!

Aug 19, 2013 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

FH FAULT CODE COMES UP ONLY AT START OF RINSE CYCLE. WATER JUST TRICKLES IN VERY SLOWLY. WATER FLOW INTO MACHINE IN WASH CYCLE IS FINE. ANY IDEAS? WHIRLPOOL MODEL GHW9250LW


Most probable case of a flow meter defect
You can access this part by taking to or three screws off the top panel in the back
Part is attached nere the water valve
White round thingy

Jun 17, 2011 | Washing Machines

1 Answer

My washer continues to dump water and over flows. Also wash cycle not working at all. Rinse and spin ok


You have a problem with your water level switch http://www.acmehowto.com/howto/appliance/washer/check/waterlevel.php
When your switch is not working, the washing cycle will not trigger to operate.
Check your water level switch for your model, look for model number under the hood of washing machine, at the sides of washing machine, or in the back..

Mar 10, 2011 | GE Washing Machines

1 Answer

We have an F&P top loading washing machine Model MW512, Product 92194-A. Problem: Poor water flow and noise from machine when filling tub for washing cycle. Initially occurred with hot water flow 12...


Depending on you lacality..IE Country, etc, you may be able to access the parts from a washing machine parts supplier.. Check the yellow/pink pages for business houses.. OR a srevice agent may sell the parts to you....Be aware that the inlet valves for hot and cold use are different on many models, and that you may void any warranty by installing yourself....Good luck....Nomess

Jun 23, 2010 | Fisher and Paykel Washing Machines

1 Answer

WASHING MACHINE IS OVER FLOWING. THE LOAD SIZE IS


The problem is the pressure switch has failed. These are usually inexpensive and are very easy to replace. There is a video at www.appliancehelponline.com/servicemanual.html this will walk you thru the inspection and replacement of this part. You can also enter your model # for diagrams and illustrations of your specific model. All parts come with installation instructions. Not all models are available.

May 16, 2010 | GE WJSR4160DWW Top Load Washer

1 Answer

I have a Whirlpool Calypso washing machine, model


communication error. changing the MCU. sometimes a bad pump could be the problem

Feb 02, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

COLD WATER IS RUNNING SLOW INTO WASHER. THERE IS PLENTY OF FLOW IN THE HOSE AND NO KINKS AND THE SCREEN IS CLEAN. HOT WATER FLOW IS FINE. WASHING MACHINE MAKES A GROANING NOISE WHEN COLD WATER IS ENTERING.


Based on your description, the selenoid is bad.
The same device feeds both cold and hot water - so locate your machine model number and year.. and look up the replacement incoming water selenoid part number. You will need to purchase it and replace it.

If your machine is under warranty, call their Customer Service line and report the water flow/noise problem.

Please let us know your findings...
-Jim

Oct 17, 2009 | Washing Machines

1 Answer

Help


This should be a problem with the fill valve.

They are usually not very expensive.

Find your model and serial number for your machine and call an appliance parts store.

They should be able to give you a price or you can find one online.

Apr 17, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...