Question about Ultra (31624) (ULT31624)
I don't think you have a problem with the BIOS version but more likely with the settings.
Please enter in the BIOS and be sure that under: main menu, ide configuration, Parallel ATA IDE controller is set up as Primary. Then you go under advance menu, Serial ATA IDE controller and be sure you don't have RAID.
Copy of the manual can be find here http://dlsvr.asus.com/pub/ASUS/mb/sock754/k8v_vm_ultra/e2476_k8v-vm_ultra.pdf
Let's start with this checks and then let me know.
Posted on Oct 02, 2008
Tips for a great answer:
Jun 19, 2013 | 10 10 Computer Network adapter Cable...
Sep 03, 2012 | Microsoft Network Accessories
Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabled
you can send photos to a another email adress by an email
open up your new email type in the company adress then you should see attachment depending on which email you are using select attachment then this will open up a browse window navigate to your photo/s select your photos you might have to wait a few seconds for it to load as an attachment then click send
hope this helps
Apr 26, 2012 | Network Accessories
When you boot up to the log in screen type in administrator as user to log in if you cant log in
during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up press and hold that key during the boot up process to enter BIOS using the arrow keys scroll down to set user password or supervisor password you can change or remove your password from there
The most common way that we know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing the Cmos battery for 30 minutes from the motherboard.
Another way is to reset the clear CMOS jumper on the motherboard itself.
Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased.
cmos battery Under the keyboard or bottom of laptop - If you are working on a laptop computer the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment. Although on some motherboards the Cmos battery is soldered in
Often many users will leave the administrator account alone or have other accounts with administrator rights. If you're not logging into the computer as administrator or have other accounts follow the below steps to reset your other accounts password.
Reboot the computer into Safe Mode
During the boot process tap the f8 button three times this will boot into safe mode where the only things working will be your mouse and keyboard enabling you to attempt to repair your computer Advanced Boot Options screen appears.
Select the Safe Mode option using the up and down arrow keys, then press the ENTER key. Choose "Windows XP Home/Professional", depending on the version of the operating system.
Press ENTER. Shortly, the welcome screen should show.
Log in as "Administrator". Click Yes to not use System Restore Mode.
Click the Start button. Choose Run and type in "control user passwords" (without the quotes). Click OK.
Select the "Administrator" user. Click Change my password. Enter a new password in the corresponding text boxes. Click OK. Write this password down and store it in a secure place Close the User Accounts window and restart Windows.
In User Accounts select the account you wish to change the password for, click change password and then enter the new password or click remove the password to remove the password from the account. Hope it helps
Apr 05, 2012 | Dell Network Accessories
Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabledi
if still no joy
click start type cmd press enter you will be in DOS mode
type in ipconfig press enter
you will see all of your internet connection details
or type in your default gateway adress into your internet search should read something like 10.0.0.138 to get an inertnet connection
hope this helps you
Feb 25, 2012 | Motorola Network Accessories
Nov 25, 2010 | HP Network Accessories
Aug 27, 2010 | Network Accessories
Jul 17, 2009 | Southwestern Bell (S60802)
Dec 12, 2008 | Maxtor 7Y250M0 250GB Serial ATA 7200rpm...
Dec 05, 2008 | 10 10 Computer Network adapter Cable...
333 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: