Question about Belkin N1 Wireless USB 2.0 Network Adapter (S6359026)

1 Answer

Cannot connect to internet

I have this wireless adapter on a P4 pc running Windows XP. I have a laptop running windows vista which works off the wireless router with no problems. I have tried to connect this pc to the network and this appears succssful, but the pc cannot connect to the internet using firefox or internet explorer. I have disabled windows firewall on both lptop nd pc as AVG firewall is running. Help!! I have spent hours on this. I have made sure all the settings match on the laptop and pc, but im not really a clued in person. I did set up the router and initial network myself and did not expect this to beso hard!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

Hopefully you have'nt give the pc the same ip address as the other as it won't connect.

You will need to make sure that DHCP is enabled within the routers settings as this will tell the router to assign ip addresses automatically, then go to network connections, right click on your wireless network card>properties>TCP/IP line>properties and tick 'obtain an ip address automatically', click ok, close window and restart pc.

Open up internet explorer>tools>internet options>connections tab and ensure that never dial a connection is ticked or the option greyed out, close I.E. then open up again, click refresh and it should connect.

Posted on Oct 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't use my adapter...


Does the EUB-362/362EXT/862 work with Windows Vista? No, the EUB-362/362EXT/862 Client Utility was written for use with Windows 2000/XP. Microsoft Windows Vista users must use the "Connect to a Network" utility in Windows Vista.

Is the EUB-362/362EXT/862 Client Utility software supported on Microsoft Windows Vista? No, the EUB-362/362EXT/862 Client Utility was written for use with Windows 2000/XP. Microsoft Windows Vista users must use the "Connect to a Network" utility in Windows Vista.

What is your OS?

Dec 10, 2010 | EnGenius EUB-362 (EUB362 EXT) Wireless...

1 Answer

I get message says ( you're connected to the access point, but can Not find the internet ?


What is your OS?

The table shown below lists all Linksys adapters that will work with a Windows Vista environment.
I wonder if your OS is Win XP.Post back!

Minimum Requirements
• 400 MHz or Faster PC
• 256 MB of RAM Memory
• CD-ROM Drive
• Avaliable USB Port
• Microsoft Windows 98SE, Me, 2000, and XP
WUSB54GSC version 2.0 is compatible with Microsoft Windows XP, Vista 32 / 64-bit edition with latest updates and Windows 7 32 / 64-bit edition with latest updates
Product
Driver Vista 32 Vista 64 PCMCIA WPC54G V1 3.100.64.0 OK WPC54GR 1.0.3.0/2.0.1.9 OK WPC54GS V2.1 4.100.27 / 3.100.6 OK WPC55AG V1.3 4.1.2.38 / 7.1.0.9 OK WPC100 OK OK WPC600N 4.150.31.0 OK WUSB WUSB54GC V3 OK OK WUSB54GSC 4.1.20.0 OK WUSB54GSC V2 4.118.4.0/4.170.61.0 OK WUSB54GR 1.0.2.0 / 3.0.1.0 OK WUSB100 OK OK WUSB100 V2 4.9.9046.1 OK OK WUSB300N 1.0.7.2 / 1.0.3.2 OK WUSB600N 1.1.0.0 / 2.1.4.0 OK OK WUSB600N V2 1.4.4.0 / 2.3.4.0 OK OK

Dec 07, 2010 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

Windows 7 driver update for Belkin F5D9050


Im Not sure this will Work
But in most Cases it will So I think its Worth a try

You will need to find the version of the Adapter

And After that Goto www.belkin.com/support

On the top right hand side on the search type F5D9050

On the results select the Link that has the Drivers

Download the Driver for the version of your Adapter

Right click on the downloaded file and select Properties

Click on the compatibility tab

Select Run this Program in compatibility mode for Windows Vista SP1

Click Apply

Now install the Drivers



Dec 29, 2009 | Belkin F5D9050 Wireless G Plus MIMO USB...

1 Answer

Can you help me please? I have trouble with networking.


You need to go to the manufactor's website and download the driver you need for your current windows version.

Dec 25, 2009 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

How do you connect WIndows Vista to Windows 7 through ADHOC?


Wireless Adapter is a device that will receive the wireless signals and will make your computer wireless adapter. without the wireless adapter you can not use the computer to connect to the wireless network. Now a days all the laptops and desktops are equipped with the built in wireless adapters.
First check whether you have a wireless adapter on your computer ?

WIN VISTA/ Windows 7
Click START ==> Control Panel ==> In the right hand side at the top you will see " Classic View "
Switch to classic view ==> you will see Device Manager ==> Under Network Adapters you will find your wireless adapter listed . Right clink on the wireless adapter ==> properties => Check whether it says the Device is working properly or not ? If it says working properly then that's great !

If you do not see wireless adapter in the Device manager , then either you do not have the adapter or the wireless adapter is not working .If you see "yellow exclamation mark" on the wireless adapter, that means the drivers are not installed for the adapter or not working. Reinstall the drivers.
Once your adapter is working properly , try to connect to the wireless network.

If you are installing the external wireless adapter to the computer and if you are using Windows 2000 or Windows 98 , ME, then you will have to connect to the wireless network using the utility of that adapter.
If you are using Win XP then you can use windows to connect to the wireless network or you can use other utility.
In case of Win VISTA, you will use windows to connect to the wireless network.
Click Here for more info

Dec 04, 2009 | Network & Wireless Adapters

1 Answer

Wireless adapter driver


Hey Superjoe302,

If you're running Windows XP, here's the driver page:
http://www.pc-ap.fujitsu.com/support/drv_lb_wxp_s6240.html

If you're running Windows Vista, then click here:

http://www.pc-ap.fujitsu.com/support/drv_lb_vista_s6240.html

Good luck!

Apr 20, 2009 | Network & Wireless Adapters

1 Answer

Can connect with usb stick on one PC and through inbuilt wireless on a laptop to the main router but not a new one


becos of you using three different os one is xp,other one is vista and other on is xpsp3 all the driver is different so how can he connect it.

Sep 06, 2008 | NetGear WG111 802.11g/b Wireless Adapter

2 Answers

Wireless connection to internet


Hi,
I just got it all working [new notebook running Vista], connecting to the net via the telkom 5102G - with a PC running XP connecting via LAN.

The 5102G comes ready configured with a network key / code [stuck on the back] so use that to connect to the router - once you've connected it'll come up with limited connectivity.

I then ran the firmware upgrade from http://www.telkomphones.co.za/5102g.htm
To do this, download and unpack the thing. In your browser, go to 10.0.0.2 [for the router config] and click on firmware and follow the instructions.

Once this is done - disconnect and reconnect the vista laptop connection. Open your browser and simply click on tools and uncheck the tickbox alongside "work offline".

I know that sounds ridiculous but that's exactly what I did and I'm surfing fine.

Now... just need to share files and printer and we're 100%.

Hope that helps.

Jan 16, 2008 | Network & Wireless Adapters

1 Answer

Try to setup home wireless network to share two home computer


Connect the home wireless network router box to the main PC through an ethernet cable with the PC powered off and the home wireless router powered off, then power on the PC & the router. Vista should locate the new wireless network and follow the windows vista network setup procedures. After the wireless network has been detected you then while the second PC's power is shut off you connect dongle adapter to the PC power on and XP will locate the new adapter. You will probably have to enter your networks pin for the connection.
Get back to me when you complete these steps.
Try next time contacting me through an online chat session. We can resolve the issue quicker while chatting together.

Nov 20, 2007 | Hawking Hi-Gain Wireless 802.11g/b...

1 Answer

Wireless network between vista & xp


Open Windows Explorer, and then locate the drive or folder you want to share. Right-click the drive, and then click Sharing and Security. To open Windows Explorer, click Start, point to All Programs, point to Accessories, and then click Windows Explorer. To change the name of your folder on the network, type a new name for your folder in the Share name text box. This will not change the name of the folder on your computer. To allow other users to change the files in your shared folder, select the Allow other users to change my files check box.

Oct 06, 2007 | Network & Wireless Adapters

Not finding what you are looking for?
Belkin N1 Wireless USB 2.0 Network Adapter (S6359026) Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...