Question about E-Machines eMachines Desktop PC

2 Answers

Emachine model T3418 problem

Pc power lite and fan comes on but nothing else happens. fan stays on.

2thatguy

Posted by on

  • Anonymous Sep 29, 2008

    My modem and monitor comes on but the screens says, "The monitor works, check PC and signal cable" And nothing is wrong with my "signal cable" what ever that may be and my pc is fine.And i am so frustrated with this freakin computer....

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My dad and I fixed our emachines T3418 by changing the boot order from CD-ROM to harddisk by going into the Bios and switching the options. I sincerely hope this can help fix your computer problems. By the way, how do you clean the fan? I know the theory, but I have not tried it. Thanks in advance!

Posted on Jan 23, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

Make sure the ram is setup correctely or is right ram

Posted on Sep 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Emachine t3418 no video pwr sply goes and that's it no boot


If you have a desktop system and it is in a no power state, I'd replace the power supply (Or if available test with a known good) before I'd replace teh motherboard, Power supplies normally fail 1st

Jan 11, 2010 | E-Machines eMachines Desktop PC

1 Answer

Mi eMachines T3418 no arranca solo suena el


es posible que tengas virus o tu memoria este funcionando mal prueba otra o tu procesador

Oct 25, 2009 | E-Machines eMachines Desktop PC

1 Answer

Yellow Light


Emachines are bad for having failed power supplies and motherboards. Test your power supply, watch this video.
http://www.metacafe.com/watch/729606/how_to_test_your_computers_power_supply_psu/

Aug 03, 2009 | E-Machines eMachines Desktop PC

1 Answer

Emachine T6426 PC..I push power button and fans come on and there is a yellow light where the blue one is suppose to be..Nothing else happens??????


Hello there:
If all of the fans come on, check to see if the fan is blowing on the power supply if it is not than you are going to have to replace the power supply. please keep me informed cause there is more that we can do if needed ok.
best regards mike

Aug 03, 2009 | E-Machines eMachines Desktop PC

1 Answer

Cant find the fuse.


the only fuse i know of is inside the power supply. never seen a fuse blow though. maybe powersupply is bad seen that before. it is a switch mode supply and has to have a load on it to check.

Jul 23, 2009 | E-Machines eMachines Refurbished EMA...

1 Answer

Can not find heat sink switches on motherboard emachine t2862


Heat sink switches? I have to assume that you're talking about a dead mother board but the fans and the LED on the mother board are OK? This is a classic eMachines problem. Their power supplies glitch and take out the mother board sometimes the power supply goes bad too.

Mar 24, 2009 | E-Machines eMachines Desktop PC

1 Answer

I have emachine model t3418 the computer was acting funny so i put in a restore cd the restore cd that came with it was for another model so it messed up my computer when i got the right restore cd it...


ok my friend

there you go this is the website just download it from any other computer and run it in you emachine computer

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3418


cheers

Aug 30, 2008 | PC Desktops

2 Answers

Emachine problems


Hi..

Since your computer is working but no display at all. Hope this steps would be helpful in your problem.


1. Turn on your computer, If the problem works again and no display.

2.Turn off your computer by pressing long your power botton until the fan stops properly.

3. Unplug you computer 220volts power chord at the back of your computer.

4. Reconnect again the 220volts power chord after 1 minute.

by. arnold@supportsave.com


Jun 04, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...