Question about Whirlpool LER7646E Dryer

2 Answers

Intermintent working My kenmore electric dryer will work just fine for many drying cycles and then will stop in the middle of a cycle. It has power and the switch is good. This is the second time it has happenned. The first time I let it sit for about an hour and it started working again.

Posted by on

  • timma8 Sep 28, 2008

    it is a 2004 model. I put in a half load and it will start for a few minutes. The noise it puts out is more then a hum, more like a stop using me sound or some big damage is on the way.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I replaced the tensioner and the belt, since I was there. It will start up and run for a few minutes and then shut down. I am using a medium to light load to test it.

Posted on Oct 02, 2008

  • 1 more comment 
  • timma8609 Oct 02, 2008

    I replaced the tensioner and the belt., since I was there. It will start up and run for a few minutes and then shut down. I am using a medium to light load to test it.

  • timma8609 Oct 02, 2008

    I replaced

  • timma8609 Oct 02, 2008

    I replaced the tensioner and the belt, since I was there. It will start up and run for a few minutes and then shut down. I am using a medium to light load to test it.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

How old is this dryer and does it get slower on heavy loads? Or do you hear a hum when loaded ?

Posted on Sep 28, 2008

  • John Robbins
    John Robbins Sep 28, 2008

    I would say that your belt tensioner is out and is an easy fix. The models that have a top lint filter are a little more involved and the models having a kick panel are a 5 minute fix.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Kenmore Dryer. Wondering why it seems to only work on 1 drying cycle? Everytime I try to put it on another cycle all the lights flash and beep...and nothing...


sounds like the washer might not be spinning the water out of the clothes good enough . 1 60 minute cycle should dry them more than dry enough .

Oct 18, 2015 | Kenmore 8804 5.8 cu. ft. Electric Dryer

1 Answer

How do you replace the door switch in a Kenmore 70 Series 68702 electric dryer?


What is the model number of your unit? Look inside the door area.

Nov 19, 2012 | Dryers

1 Answer

Electric dryer stopped in the middle of a cycle of towels (or after they were dry...not sure, as renters reported problem). . There appears to be no current..panel does not light at all Have reset the...


My 4 yr. old Maytag electric dryer stopped in the middle of drying towels and wouldn't restart. I called one repairman who told me it was my motor and I called another repairman closer to where I live and he came out and replaced my fuse. My dryer works fine now.

Aug 17, 2011 | Kenmore 63942 Dryer

1 Answer

Kenmore dryer DW4305295 - dry cycle will not stop,


When it completes a cycle, does it continue into the next cycle? The power switch might be bad if it does. You can take the switch apart and clean or repair it, or you can simply replace it. (They're not very expensive.)

Jun 12, 2010 | Kenmore 63942 Dryer

1 Answer

Hello, my kenmore dryer just stop working, light inside is still on but will not turn or come on Mod# 110.c66492500


Is the door completely shut? Did it stop working right in the middle of a cycle? Are you drying shoes in this load? I'd turn it off, and try it again. If this doesn't work, try it on another drying cycle. If this doesn't work, feel free to contact me again. I hope this works for you. Good Luck! Jim

Mar 30, 2010 | Kenmore Dryers

1 Answer

Kenmore dryer will not dry completelt in even heat cycle


This video will help you to determined what you need,
copy n paste
http://www.youtube.com/watch?v=HRKIU4LiS20&feature=related

for parts n prices
http://www.partselect.com/AppliancePartList.aspx?Brand=Kenmore&Appliance=Dryer&ModelNum=&Type=Electrical%20Parts,%20%20No%20Heating%20Elements&MinSize=U&MaxSize=U&Electrical=Y&Metal=U&Plastic=U&OneColor=U&PageSize=15&FirstPart=1

Was this helpful?

Apr 29, 2009 | Kenmore 63942 Dryer

1 Answer

Extremely low drum heat but setting is on HIGH.


Electric (Kenmore - 60931) dryer takes forever (several cycles) lately to dry clothes set on high heat (actual heat in tub feels low though). There are no obstructions in the venting and the 240 volt connection is fine. The timer rotates the dial (timer motor working). Help!!!

Sep 15, 2008 | Zanussi TC7102W Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...