Question about Projection Televisions

2 Answers

52 inch rca hdtv has red blue green lines through the top of it the picture is curved and its 3d looking

Posted by on

  • 1 more comment 
  • brendaarlene Mar 06, 2009

    En mi libro de usuario dice que tengo que usar el autoconvertidor pero cuando voy al tv estA accion no esta en el menu del tv. mi modelo es R52wh77 que puedo hacer para hacer esto y que funcione el tv

  • i hate my tv Mar 19, 2009

    my 52 inch rca projection television looks 3d........can hardley read the menus. can not find my actual tv remote. bows inward at top and bottom. multiple letters on top and to the side of every word!!! 3D effect!!! I have read the other responses, if this is something i need to have repaired how much should that cost me? Is this something I could repair on my own?

  • Anonymous Apr 02, 2009

    I dont have the controller, and I can't get to convergence set up on my TV...what can I do?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

It seems convergence problem in your tv.
Let me know model number to help you out in better way.

Posted on Sep 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 65 Answers

YOu have convergence issues. Ok first question. IN your setup menu do you have the convergence option/ if you DO not then it can be a specail fusable link. fl231 if you do. next question do the picture bow in at the middle. if you do then it possibly a convergence power supply issue. next if you go into setup convergence does the crosshairs adjust up or down left to right on both blue and red. I if so then theres is a chance that it can be a convergence adjusment or a amplifer problem AS always THIS SET CAN GENERATE LEATHAL 380 VOLTS EVEN WITH SET UPLUGED SO BE CAREFULL. 

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Picture is bowed inward and looks like a 3d image without the glasses. I also have a green, red, and blue line curving across the top of the picture.


Looks like the focusing lens may have moved a bit or the projector lamp has gone weak. Get a technician to check up the projector.

There's very little you can do here.

Mar 05, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

The picture looks 3D


Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.

42d3683.jpg

7859b01.jpg

e87380c.jpg
Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a fix

69189a5.pngCONVERGENCE SOLUTION

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 03, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

RCA P52755BA 52 inch tv looks 3D


You have a problem with convergence and all you may need to do is replace a fuse. Look up convergence for your tv model and hopefully you will get an answer as to where the fuse is located and how to replace it. Very common for RCA tv's

Aug 30, 2009 | RCA P52926 52" Rear Projection Television

1 Answer

Letters and numbers are 3d and curved picture


Hello

red, green, and blue lines curve across the top of tv is cause by defective convergence STK IC or you have open resistor at convergence section. if you have defective RGB Color vertical ramp probably you have defective STK IC..

Angel
Thanks...

Aug 02, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Color is splitting, and almost looks 3D.


the ITC222A convergence option missing repair kit at the following link should repair that issue. The kit contains the parts and the instructions on CD
http://www.tvrepairworld.com/

Jul 19, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Picture almost looks like it is in 3D on RCA 52" rear projection


there are 3 brown fuses by the flyback the 1 in the middle is bad

Jun 06, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Pictures look like they are in 3D


it sounds like your convergence is off.

you have Red, Greed & Blue projection guns
through your menu's you will find adjustments for them ...

set your green first then align then red and then blue to the green..

when making this adjustment the tv should put up a caliration signal called a crosshatch
a matrix of H and V lines to align

Apr 15, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Picture in 3d without the 3d glasses


Replace 2 convergence chips, will start with stk ###-###

Oct 02, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...