Question about JVC Everio GZ-MG130 Camcorder

1 Answer

Tiny problem Hi,just bought camera and I have a small problem not sure how to set time and date.althougt I now how to set it in the screen I have no idea why it doest display later when watching on tv? any idea why? thanks Edyta

Posted by on

  • Anonymous Oct 01, 2008

    taking clear pictures

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1. press menu button on the inside of the fold out display
2. use the joystick type button on the display to move to the left menu
3. use the joystick type button and move up 2 times.
4. use the joystick type button and move right.
5 use the joystick type button and move down 9 times to "clock adjust" and press it to select.
6 be sure and press it again to save the changes before you exit the menu

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Date/Time resets every time i turn on camera.


Hi, yes, there is a small coin memory battery, usually something like a CR3032 lithium battery. Turn off the camera and insert a new 'coin' battery (correct side up). Close battery cover, turn on camera and go to menu and set time and date. It should remember the time and date for a year or two, provided you put a regular battery on the camera on a regular basis. Also note, some older Sony cameras allow you to set it so that it shows only the date for the 1st 5 seconds when you first turn on the camera that day, then shuts it off unless you want it to superimpose the time and date on the video. Good luck, and let me know if this solves your problem. John

Jan 17, 2012 | Sony Handycam HDR-XR520 High Definition...

1 Answer

SONY DCR-TRV285E lcd problems.view finder is ok but lcd not work i hav also repair control panel swich is not workor pls send me service manual page to gide me so pls gide me


I red the manual that came with the camera there is a reset button inside the lcd screen near the menu buttons its tiny press it with a tooth pick or wire you will have to reset the time and date after pressing hope it helps IF NOT check the menu settings good luck scottymac

Oct 19, 2011 | Sony DCR-TRV285E Digital-8 Digital...

1 Answer

When I turn on my handycam the Clock Set screen comes up and whatever I press, nothing responds. I cannot get this screen to go away so I can play tapes and record


Hi,every camcorder has a special built-in battery for its clock in addition to the external camcorder battery which works independently.You have to replace it...
Would you please locate that small battery on the main body of camcorder hiding with small cover lid possibly you need to get in with a tiny screw to open it..and replace that battery and re adjust the clock once ,than no more the Clock Set screen comes up..

Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)
Hope this helps!
Thanks

Jun 20, 2011 | Video Cameras

1 Answer

I have the JVC digital minidv camcorder, Model No. GR-D270U an it keeps telling me it's in safety mode and I can't even get the tape out beause the door opens but it's like the mechaism to pop...


After trying the remove-and-reattach-battery exercise, I would suggest you go to the menu and find the setting for initial setup. Select that - which may reset the system.
If not.. then try going to the clock and change the date/time settings, turn the camera off, remove-and-reattach the battery. Re-power the camera, go back and change date/time setting to what's current. And try to eject the tape.

On one of our analog video cameras it seems like there was a tiny little hole someplace on the side of the camera that you could use a tiny small thing like a toothpick to press in there to accomplish a Reset. (It will have tiny raised letters saying "Reset" right beside the little reset hole.)

May 16, 2011 | JVC GR-AXM270 Hi-8 Analog Camcorder

1 Answer

Changing to correct date on camcorder


Hi,
To change / reset date and time touch on lcd screen, HOME > SETTINGS > CLOCK / LANG > CLOCK SET and set the date and time.
Above said is mentioned in user manual of DCR-SR42 and you can download it from Sony Support.

Dec 03, 2008 | Sony Handycam DCR-SR42 Camcorder

1 Answer

Sony Handycam DCR-TRV18E


Hi there,

Firstly you need the remote control that came with your camera (RMT-814).

Switch on your camera to VCR mode. Then on the remote, press the Data Code button (and of course, point the remote towards your camera). This should display the date and time in the bottom left of the screen.

It should display the appropriate date and time for each bit of recorded video.

Hope this helps!


Ron.

Jul 06, 2008 | Sony Handycam DCR-TRV18E Mini DV Digital...

1 Answer

Jvc gr-d370as - help connecting to Mac - Date and Time Setting


hi there on the front there is a small wheel turn your switch to the letter (m) then press down the small wheel on the right of machine, this will give you the menu so you cant change date from that hope that helps
mike

Jun 23, 2008 | JVC GR-D20EK Camcorder

1 Answer

Date??


Please note that my camera is a PRO845 model but the following info may still be helpful to you.
Look carefully on the bottom and see if you can find a tiny push button which may say ADJ (for adjustment) beside it. With a good battery if you press this button in you should be able to adjust the time and date. On most older RCA models you must also have the clock battery installed. On mine it's a thin dime sized 3V battery. Mine is a CR2025 from Maxell. Using an external power supply or a good battery you can still make the adjustments to the time and date but without the tiny back up 3V cell you will loose the setting when the battery is dead or removed as well as the power supply.
When you press the ADJ button one of the time or date figures starts flashing and then you must change the value by pressing the DATE button. Once you have the value you need you must press the ADJ button again and it will jump to the next figure. Keep repeating this until you've programmed them all.
.

Nov 12, 2007 | RCA PRO842 8mm Analog Camcorder

2 Answers

Need help on setting the date and time when you record it into dvd.


You need to add a data code. put your camera into play/edit. choose MENU>DATA CODE.

Jan 27, 2007 | Sony Handycam DCR-HC32 Mini DV Digital...

Not finding what you are looking for?
JVC Everio GZ-MG130 Camcorder Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Shekar Avadhani

Level 2 Expert

60 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...