Need new antenna for sharp xp 500 - Sharp CD-XP500 CD Shelf System

if your converter box has rca output toy can hook it up that away. Or you can look on ebay for a new main board. very easy to replace. be sure at all time to unplug tv while back cover is removed.........hope this helps

the antennae cos will be low

and am not cleaqr abot your question of power supply.

can you explain your requirement in detail

Try these web sites:

http://search.aol.com/aol/search?&s_qt=sb&q=Sharp+mini+cd-dk890n+parts&tb_oid=07-01-2013&s_it=amonetizetest1-ie&tb_mrud=07-01-2013&tb_uuid=20130107163427450

http://www.partstore.com/Model/Sharp/Sharp/CDDK890N.aspx

There is no difference between a "digital" and analog antenna. Either antenna will capture the signal. What you need is a digital converter box to convert the over air digital signal to the older analog type signal your TV needs. You connect the antenna to the digital converter box, and the digital converter box to the TV.
Several years ago, the US government forced peopel to buy digital converter boxes or newer TVs that could pick up the digital signal. Either get a digital converter box or a new TV.

Hook up your rabbit ears and auto tune the TV and see what happens.

quick solution is to read 500 times this quote.
peace be upon him.
patience.time heals this time is a great healer
till the problem will solve.
plz request fixya to not delete my account.
blockporn.tk

antennas are not analog or digital, just VHF, UHF and they typically connect to a RF coaxial jack on the TVs rear panel. 75ohm silver round jack. Select in your TVs menus, AIR when you want over-the-air TV stations and do a new channel scan to pick up local channels.

You can go to any electronics shop and ask for a fm antenna, it's only a wire with a connector, it has no electrical components.

You'll need a converter box to use a regular antenna.

This unit does not have ATSC tuner , so you will need to use converter or digital cable box.