Question about Hitachi 50UX26B/27K 50" Rear Projection Television

1 Answer

Plenty of Sound, No Picture

Ok so I have read a lot of your solutions and you seem to be very helpful so I have a question. I was watching the tv and the picture went out. Still got sound just no picture. So I took the lower back off and I have 3 green leds and one red. I did not see any others. the lamps for the projection are off, but if I do a Magic Focus they will come long enough to flash the magic focus stuff, or to the best I can tell they all come on. Any suggestions????? Thanks,

Gary

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You may have to replace the convergence IC's or the lamps. Impossible to say without having a manual inspection. Best bet is to take it in for a service repair..

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitshubishi VS-6041 No picture, sound ok


It has been my experience with that model mitsubishi that the usual culprit is loss of vertical sweep. If the beams in the picture tubes stops moving up and down this is detected by the micro processor and the video is blanked, but the set is not shut down. The usual cause of loss of vertical sweep is bad solder connections on the deflection yokes or a failed vertical output IC.

May 27, 2009 | Mitsubishi VS-6041 60" Rear Projection...

1 Answer

Screen flashes several times before picture comes on. Sound OK.


sounds like your bulb may be flickering at start similar to a flourescent, do a search on google for bulb+your model, and you should see plenty of sites to compare prices.
Hope this helps, please give a good rating

May 12, 2009 | Projection Televisions

1 Answer

50ux26b Hitachi


Good Day;

Sounds like the Convergence Circuit in the TV has failed. Call an Authorized Service Center and have them come out and give you a wtitten estimate B4 repair.

Good Luck, big IRISH.

Sep 27, 2008 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Samsung HL-R5067W no picture or sound.


I have an HL-R5067W  no picture, no sound.. What is the solution

Feb 23, 2008 | Projection Televisions

1 Answer

KP-53XBR45, Sound OK, but no picture


You may have a bad convergence... short will shutdown your HV circuitry leaving just audio?
It has no bulb to change?

Oct 29, 2007 | Sony KP-53XBR45 53" Rear Projection...

1 Answer

D52gw12 ge television smokes


Please give complete service # off back of set so I can research
with accuracy........T.

Sep 07, 2007 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

No Picture Sound OK


Sounds like maybe some bad solder connections in the deflection area, If I remember these monsters correctly they are hard to dissassemble with lots of wires, the culprit is probably a solder crack around the horizontal section or the power supply for the horizontal. Might require a technician for service, if you attempt yourself, use lots of masking tape to label your wires.

Jul 08, 2007 | Mitsubishi VS-45605 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...