Question about Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore Elite shaking during spin cycle

My machine purchased in summer of 2005 seems louder during the spin cylce plus it shakes so severly that it "travels." I've had Sear repairmen look at it when it was under warranty (3 years) and was told it's just the drum springs..they smooth out and the drum can then get out of "wack'. I'm sure that's a technical term. It's now traveling so much and such an annoyance that my husband wants to buy a new machine. Help!

Posted by on

  • 2 more comments 
  • Anonymous Oct 14, 2008

    I too have the same problem....the banging during the spin cycle and the traveling. My husband is very handy and can fix it himself if we could figure out what is needed to repair this problem.

  • Laundrea Oct 21, 2008

    I have a Kenmore Series 90 top loader, model # 110.2891279. I have leveled the machine several times; however, it is very noisy and walks across the laundry room during the spin cycle.

  • vanguard3006 Oct 21, 2008

    kenmore 80 series mod. 110 23832100 during spin cycle shakes violently stabilizer springs need to be re-attached or replaced?

  • smurph163 Dec 16, 2008

    I have the same problem... We bought our Kenmore Elite July 2005 and haven't had a problem until now. When it first started (about 3 weeks ago) I thought the load of clothes I had put in were lop-sided. I leveled the clothes out, but it kept occuring and still is on every load. Do we need to buy a new washing machine?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Moved a Kenmore Elite and when we put it back in place it vibrates loudly. We tried leveling it and that has not worked. Any ideas?

Posted on Nov 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

Is this a top loader or front loader and I need a exact model number off the label inside the lid or door.

Posted on Oct 08, 2008

  • Elizabeth Vestal
    Elizabeth Vestal Aug 10, 2015

    Front loader. Washer attached to the Pedestal. Model # 110.45862400
    Serial # csr2417541

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud noise during spin cycle


Open the cabinet top and check along the sides for a broken or out-of-position damper. Shake the mechanism in several directions to help locate. Hope this helps!

Jun 12, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore Whasher shakes on spin cycle


unfortunetly this is common , these new frontloads spin fast even with no pedestal these things move...
make sure the locking nuts for the legs on the pedestal are screwed securely up to frame on pedestal, also could be a floor issue depending on where it is, slooping or not solid floor.

Jan 28, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Oasis HE shakes violently during spin cycle


Machine legs should be adjusted so that machine is level and standing on all four legs. The load in the machine should be evenly distributed. Utube has an excellent video on washing machine repair.

Nov 20, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Shaking in spin cycle and tub moves too easily in washing machine


the tension springs on the tub mite have came loose during moving

Jul 01, 2009 | Washing Machines

1 Answer

Kenmore washer stock no. 22642 shakes terribly during spin cycle


There is a suspension plate under the tub.
It also has 3 pads on it to support the tub.
There are springs attached to support the angle of the tub.
Check all these parts and repair or replace as necessary.

Mar 02, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Abnormal shaking during spin cycle


THIS IS CALLED A BEARING JOB THE INNER TUB AND THE OUTER TUB HAS TO BE REPLACED THESE PART ARE USALLY UNDER THE MAN. WARRANT BUT THE LABOR IS PRETTY EXPENSIVE ON THIS JOB BECAUSE THE WHOLE WAHER HAS TO BE TAKEN APART

Dec 16, 2008 | Kenmore Elite 45986 Front Load Washer

2 Answers

Severe drum? shaking and display lights flicker during spin cycle


Loose mounting points or broken pins. If not that then possibly drum shaft could be cracked.

Nov 10, 2008 | Indesit W 123 Front Load Washer

2 Answers

Kenmore washer shakes violently during spin cycle


syrny,

Not sure what you did, exactly. First, does the machine shake when spun empty...and then with water only? If so, you have probably failed to tighten something or misaligned something. Go over your work.

No shakes? Rearrange your load. You may have a pair of heavy wet jeans which is throwing the whole thing out of kilter. It only takes about a half pound of sodden clothing to do this.

Nov 26, 2007 | Kenmore 22422 Top Load Washer

5 Answers

Kenmore washing machine shakes when spinning out


our's did this, it shook horribly. it turns out one (or more) of the shocks had come out and the technician had to come out and replace the shocks.

Nov 03, 2007 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...