Question about GE APN10AA Portable Air Conditioner

2 Answers


I'm getting an E4 message when trying to connect the portable ac. It is powering on and the fan is working all right. I tried taking the water bucket out and putting it in again,,,,but no luck.
Please help!


Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

the switch is more likely the cause try removing bucket and pressing lever manualy by hand then start it up again if it works you know the prob as this was mine the plastic connection aint the best

Posted on Mar 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just got ape08aj-m1,unit will not power up. power cord,breaker, and fuses all o.k. no display on lcd panel ,no audible sounds.

Posted on Apr 27, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My dishwasher says E4


The error code E4 means selector switch pads is stuck.
First try a hard reset. Unplug the unit for 10 minutes and then switch on the dishwasher. Most cases you won't get the error message.
If you still get the error message then you need to take to service center to get it repaired. Mostly, the inner connectivity between the pad and circuit board is loose/bad.

Hope this helps.


Feb 27, 2011 | Kenwood KDW243A Builtin Dishwasher

1 Answer

I don't know where to put the water. Its been draining water but I don't know how to refill it.

It makes water on it's own , thats the condensation from the Air conditioning process itself.

Better not to use the small water condensation drawer, rather use a bucket with the drain hose supplyed with the system. it holds alot more water and you shouldn't ever get the P-1 error code because of having the drawer full of water or the drawer switch missaligned.

If you do use the water drawer be careful and gentle when putting it back in after emptying it. It has a switch in it that makes contacts for the AC unit to work in AC mode and not just fan Mode.

The fan will always turn on unless it goes out, but the AC when it is on will sound diffrent when working it should sound a bit like a air compresser at the gas station because that is basicly what it is.

Sep 04, 2009 | Everstar Portable Heater/Fan

1 Answer

I have a ARP-30125 portable A.C. just about 1 yr

try a hard start electronic relay(it has a big capacitor to give it extra kick to start) clean both fins...oil fan motor

Aug 18, 2009 | Heating & Cooling

1 Answer

E4 error message. a/c option will not work.

i have carrier ac and it showing E.4 it is not cooling at all please help to solve the problem

Jun 10, 2009 | GE APH10AA Air Conditioner

2 Answers

Water going into carpet instead of ac water bucket

I have this air conditioner. What I did was get a long plastic tube from home depot and connect it to the middle back drain. I then put the plastic tube outside my window, or if u have a drain somewhere put it in there or put the end into a big bucket. Let gravity do its job. I did not connect the tube to the internal bucket b/c I would have to empty it too often. The air conditioner is on top of a table so that water will flow down the tube and out the window.

May 07, 2009 | Heating & Cooling

2 Answers

My domain air 2.65kw portable ac unit - E4

Make sure the filter is clean and the pump is operating.

Mar 08, 2009 | Heating & Cooling

3 Answers

Model No. APEOAJM1

Its the switch inside of the drain bucket hole. It needs to be pressed in to allow the cool setting to run. The unit needs to know that the bucket is in place. Stick your hand in there and press it down with your finger. The unit will run fine and you will know your problem and solution.

Sep 06, 2008 | GE APN10AA Portable Air Conditioner

4 Answers


The E4 code means - Overfilled. To much inlet water. Remove water manually from the tank pan and try operating a new cleaning cycle. Good luck !

May 31, 2007 | Baumatic 23 in. BDW14 Built-in Dishwasher

Not finding what you are looking for?
GE APN10AA Portable Air Conditioner Logo

Related Topics:

3,049 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Heating & Cooling Experts

ray gallant

Level 3 Expert

41075 Answers

Todd B

Level 3 Expert

571 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you a GE Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides