Question about Kenmore 62602 Electric Dryer

1 Answer

Dryer makes faint clicking,but wont start

I have a Kenmore Elite 110.65922401 (surprise!!) about 3 yrs old. Seemed to be working fine..then stopped working just like that.When I push the start button, I can hear a faint clicking but it wont start.Someone said its a relay something or another.I want to try and fix it myself I am a single Mom and have learned to do it myself a lot.Is this hard to fix and can you tell me what part I need ?? I don't want to end up with something I don't need!! And yes..I know to UNPLUG IT FIRST..lol.Thanks for any help you can give me!! Soaked in Colorado

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi thanks for the question it could be a broken belt lift out the lint screen 2 screws remove them use a flat screw driver at both ens 2 small clips under neath the top . pry up . lift the top you should see the belt it could be broken replace the appliance doc

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore elite dryer that is only 4 yrs old. It stops about 5 minutes into the cycle and puts up 2 codes. CLL and Sru what do these codes mean and can I continue using the dryer ?


Clean the entire exhaust duct from the back of the machine all the way out of the house, if the codes don't change. Call a service tech... CLL SRV = call for service

Apr 26, 2016 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Sears Kenmore Elite dryer stopped working in the middle of a drying cycle. The drum light is still works - so it has power. But when I press the Start button, I just hear a faint clicking sound. Any...


Most common cause is a partially or fully clogged dryer exhaust vent makes the dryer overheat and trips the high temp limit fuse. Brush out the vent all the way to the outside.

Feb 20, 2011 | Kenmore Dryers

1 Answer

HE4 propane dryer wont heat, how do I get the codes display?


Sounds like a clogged exhaust duct or vent. If not venting properly, most dryers will turn the heat off, for safety reasons.
Go for the easy fix first. Before removing your exhaust ducts from the dryer, look for any kinks that may cause blockage. Clean out the duct of any lint or water that may have accumulated. Check the vent on the outside of the house and make sure that its not clogged and opening properly.

Jun 05, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

New kenmore dryer, set up right from box, wont turn on


call Sears your dryer is guaranteed for 1 year, parts and labor

Jan 18, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE3 Dryer (3 yrs. old)


when u push the buttons do all lights light up if so ,, machine is in lock mode ,, press and hold the little icon that read lock for about 3 seconds unitll lights are off then run ,, let see

Nov 19, 2008 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite Oasis HE/ Error Code F1


repl/ main control board reason for error code F 1 ,,,nothing else

Nov 08, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...