Question about Mitsubishi Projection Televisions

1 Answer

I have Mitsubishi WD-62525. Last week I turned TV on and there was no picture, on green horizontal lines across the screen. The picture then went black and I only have sound. The lamp indicator lite turned red and the TV shut down. This week I replaced the lamp with a new one. The same issue is occuring, black screen, lamp indicator light is red, still has sound and the TV shuts down on it's own after a few minutes.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

That is a common problem with that model you will need the v26 power pwb repair kit and the V26 FMT pwb repair kit. You can get both kits at the following link which includes the replacement capacitors and instructions on where the capacitors are located. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mitsubishi WD-62525. In general the picture is great from all sources (cable, component, and hdmi). However, there occasionally are very thin, horizontal lines that flicker across the screen....


I have seen this problem before. It is usually caused by a malfunctioning color wheel. Replacing it should resolve the problem. Let me know if you wish to fix it yourself so that I can find you a replacement.

Jan 16, 2011 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi WD-62525 TV will not turn on


Hi,do you hear any strange noises? If you hear clicking or like wanting to turn on it could be the board that powers the lamp it's called the ballast.Here's the instructions to replace it for a samsung ,it works like your mitusibishi:http://www.fixyourdlp.com/guides/samsung/bp47-00033a.php The ballast has a sensor that detects when it's not able to power the lamp or if lamp is not responding,it will flash red when that sensor detects that.When you say: "it began to roll like the vertical and horizontal hold did not work then the sound went out" Do you mean you where getting horizontal lines? If you did that could be the Dmd.his is how it works: http://electronics.howstuffworks.com/dlp1.htm Basically the light of the lamp goes through a tunnel that carries a color wheel(rotating disc with a gamma of colors that creates the colors on your tv)then the light of the lamp goes through the DMD board which is a chip composed of around 2 million pixels that creates the images and colors.When it starts to fail it will create black bars,pixelation,color distortion or white dots on screens. Usually when there's a green light it could indicate a problem with the power supply,sometimes some capacitors do go bad. Check all of this and comment on this answer to see how it went.

Apr 08, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

WD-62525, continous amber lamp light. No picture. Lamp is good.


Hello:

Make sure u replace the lamp cover as the safety switch need to be closed to make the set work. If new lamp did not repair your problem , then it may well be the Ballast Board, Sometimes call the Lamp Driver.

Nov 28, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

T.V.powers up I get light blue screen then shuts down mits.wd-625


not bulb component is damaged in power supply serction shutting down to protect other components

Sep 09, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Green horizontal lines on screen no picture


The green CRT's (color picutre tube or color wheel, or ballast) will need to be tested for replacement.
It is quite common with these tv's

You will need an ohmmeter and or voltmeter and test each component for currency and accuracy

May 06, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Vertical Green Lines across TV Screen with no picture


The capacitorson the FMT board have failed, which will cause that symptom. Is the menu screen clear when you hit menu?

Apr 27, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Flashing Green "Timer" light on my Mitsubishi WD-62525


My Sony had the same problem. Unplug from the wall for 36 hours and it should solve the problem

Mar 22, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi WD-62825 vertical lines, blue snow, picture jumping


I have the same problem with my tv, my tv tech said mitsubishi knows of the problem and knows how to fix it, but it would cost me 700.00 plus his labor to take out the chassis and send it in to mitsubishi, plus I would be without a tv for up to a month. this is b.s.

Oct 30, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Flashing Horizontal, Circuluar, Colored Lines


sounds like bad capacitors on the FMT board need replacing that is a common fault with the first generation DLPs There are 3 bad capacitors.

May 31, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...