Question about Panasonic KX-T7633 Corded Phone

1 Answer

Conference call how do i conference incoming calls...i can manage to conference 2 but not more

Posted by on

  • reception165 Sep 26, 2008

    Thanks for your reply, but I think I have figured it out through trial and error!

  • Carl Navarro
    Carl Navarro May 11, 2010

    The TDA systems have multi-party conference, but, to tell you the truth, I have never set them up for many. What system do you have? I'll grab my cheat sheet this weekend with the instructions for your specific system if you write back.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

Depending on which system you are using (not the telephone) and how it is programmed, you may not be able to go beyond a 3 party conference. Some systems allow up to 8 parties. Just press Conf, attach to another call, and then press Conf again to go into the Conference. As they say, "Repeat as necessary."

We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CO 1 cannot call out or receives incoming.


Panasonic KXDT321 Phone
Conference call Call party 1 and speak
Press transfer
Call party 2 (press 9 for outside line if needed)
Party 2 answers
Press transfer then 3 speak to all three people
Repeat if required

Jan 24, 2014 | Panasonic KX-T7731 Corded Phone

2 Answers

How do I conference call


You may download the user manual part 1 and part 2. The conference call instructions begin on page 51 of part 2.

Feb 20, 2013 | AT&T ATT-974 Corded Phone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

1 Answer

Call conferencing


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 11, 2009 | NorStar Meridian M7310 Phone

1 Answer

Conference calls


Press the conference button, dial your third party, once connected, press conference again, that will bring all parties together.

Nov 18, 2008 | Phones

1 Answer

Conference Calls


To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

Aug 22, 2008 | Nortel T7316E 2-Line Corded Phone

2 Answers

Conference Calls/Transfer


Conference [Feature] [3]

  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)

May 21, 2008 | NorStar Meridian M7310 Phone

1 Answer

Conference calling


While tlaking to 1st party press 'CONF' button,
Dial 3rd Party's No. (0' first for outside line)
Press 'CONF' Button

Feb 12, 2008 | Panasonic KX-T7730 Corded Phone

1 Answer

Can't get the conference call to work on the etw-16dc-2


With a call in progress, press CONFERENCE, dial the internal or external number (you may have to dial 9), then press CONFERENCE again. This will join the three together.
Note: for two external calls, your extension must have the ability to access more than one outside line.

Jan 23, 2008 | NEC Electra Professional ETW-16DC-2

Not finding what you are looking for?
Panasonic KX-T7633 Corded Phone Logo

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...