Question about Printers & Copiers

Open Question

I have an OCE 9400-II and when I copy and/or plot the paper stops just before it is cut and when you look at the print there is smug. The last 1/2" of the plot is beyond the end of the paper.

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: Error in Oce 9400 Plot Director Win 2000

There are a few possible solutions.

First, only the last version of Plot Director (3.4.3) works in Windows 2000, so make sure that is the version being installed.

Secondly, once PD is installed and uninstalled all registry references must be removed before attempting to reinstall or you will encounter errors.

Third, make sure you have Administrator privileges when installing or editing the program.

Last, because there has been no development on PD since 2001 it may be having issues with security, such as the ability to edit files that are in a protected zone or communicating thru a firewall.

As a test make sure that none of these programs are active during installation or configuration.

Posted on Mar 03, 2009

yammy_alf
  • 666 Answers

SOURCE: my OCE 9400 will not turn on. It was working the

check first for the ac voltage for wall socket going to copier socket, then check for the power supply ckt area, if not in warranty period open it and check for possible blown fuse.

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oce fx 2081 trouble code 05 help me pleas


OCE clear error message replace toner oce fx 2081 ... - Fixya

www.fixya.com/tags/clear_error_message_replace...oce_fx_2081/.../oce
Ask your Clear error message replace toner OCE fx 2081 questions. ... ...error code0501 message, though we've vacuumed it the toner as best as possible. ... ...error 2201 switch on/off messages very frequently on my oce 9400 machine, any solution!!! thanks Might be NTC6, which is located in ... 05 is appearing on the.

clear error message replace toner oce fx 2081 Questions ...

www.fixya.com > Forum > Tags
Find solutions to your clear error message replace toner oce fx 2081 question. ... ...error code 0501 message, though we've vacuumed it the toner as best as possible. Well ... ...error 2201 switch on/off messages very frequently on my oce 9400 ...

Sharp ARM 550/620/700 Reset Machine with Error Code ...



Dec 15, 2015 | Printers & Copiers

1 Answer

Our Oce Plot Wave 300 is going through toner very fast. The toner waste bottle is supposed to last through two toner bottles but fills up in less than one bottle. The OCE technician has looked at it but...


Dear
the service engineer is right, Pl. check the resolution of the printer, next check the toner cart. if possible try disconnect the ground connection to the doc.blade.
Thanks.

Mar 03, 2015 | Printers & Copiers

1 Answer

Toner rate for oce 9400 is very low


How much black is on the page. Manufacturers usually base theirs on approx 5% coverage. Big title blocks and pictures us more toner.

Dec 27, 2013 | Printers & Copiers

1 Answer

PICTURE IS SMUGGED


If you're printing on photo paper, make sure you are printing on the correct side. Most photo paper has only one side to print on, the other side is a non-porous backing, and ink will sit on the surface until it dries (15 - 30 minutes, depending on temperature and humidity). And it won't look good even when it dries.

If you're printing on the correct side, try a different brand/type of photo paper.

Dec 28, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

Put wrong toner in machine now prints are black


There is only one way to solve the problem. Call a oce service rep. to come out and have them vac. out all of the wrong toner out of the hopper & developer unit and give the bill to the person that put the wrong toner in to begin with.. Good Luck...

May 27, 2009 | OCE Printers & Copiers

1 Answer

Marks and smugges on the prints made my dell 3100cn color printer


All color printers have a calibration mode.Essentially it makes sure that everything starts and stops at the same time.It should be accessible on the contol panel

Mar 24, 2009 | Dell 3100cn Laser Printer

1 Answer

Error in Oce 9400 Plot Director Win 2000


There are a few possible solutions.

First, only the last version of Plot Director (3.4.3) works in Windows 2000, so make sure that is the version being installed.

Secondly, once PD is installed and uninstalled all registry references must be removed before attempting to reinstall or you will encounter errors.

Third, make sure you have Administrator privileges when installing or editing the program.

Last, because there has been no development on PD since 2001 it may be having issues with security, such as the ability to edit files that are in a protected zone or communicating thru a firewall.

As a test make sure that none of these programs are active during installation or configuration.

Feb 20, 2009 | Printers & Copiers

1 Answer

Oce7050/error code 2205


what is oce 9400 error code 0813 ?
plase help me??
msmSAS@YAHOO.COM

Dec 20, 2008 | OCE 3140 Copier

1 Answer

Incomplete plot from .pdf file - Hp DesignJet 1050C Plus


Was the plot originally done on a size D or E plotter.. A .pdf is generally not a good way to send a plot that has to be done to scale.. Can they re-send the plot in a hpgl format, or a format that you can use in another program, liks ACAD, and then print it through that program? This would provide you with some control, that a pdf document will not allow.

This is just a stab in the dark for me, but I am familiar with plotters in general, just not the many formats to print from..



Nov 19, 2008 | HP DesignJet 1050c plus InkJet Printer

5 Answers

New out of box!!


If you already have tried reseating all of the inks and and inks are still not recognized, Please contact Epson tech support for a replacement ink or if they find out after some diagnostics that it is the printer that is having an issue they would be replacing your printer.

Jun 22, 2008 | Epson Stylus CX9400 Photo Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

old marine
old marine

Level 3 Expert

1453 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...