Orion vcr code

Hello
Three digit universal remote codes for Orion are:
035/ 121/ 135
Four digit codes are:
0121 0135 0035

Hello

Three digit universal remote code for Orion are:
035/ 121/ 135
Four digit universal remote code for Orion Tv are:
0121 0135 0035


Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

NB: Switch OFF and switch ON your TV, with its FRONT PANEL POWER CONTROL SWITCH EACH TIME before tring an other code.
OK.

First of all test that your remote works, programme it with another television/vsr or aux.
Every universal remote has there own code for a specific television, offen there are many codes for the same brand, just test them all. I bought a HQ remote and I had like 20 codes but none of them worked. Then I looked in my HQ manual and programmed the code for Orion vcr and now it's working great. The code was:1053. Good luck.

1382, 3213, 1383, 3202


try one of those

phillips universal remote with orion 1326 tv.
ned code

Try the codes for Orion, Emerson and RCA as well as Sansui. Good Luck!

http://www.hifi-remote.com/manuals/ is for the manuals for one for all.

For most remotes check out this
http://www.remotecodelist.com/remotes/

These are codes used with Orion TVs
0713, 0115, 0105

062

I have an Orion TV/VCR combo with a Philis Universal remote. I had to use the Sansui codes for the combo. My code for my Orion was 632.