Question about Philips J44417 Digital Camera

1 Answer

How to install Driver USB Camera OKER OE-017 - Philips J44417 Digital Camera

Posted by on

  • Anonymous Feb 15, 2009

    1234

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

เจอแล้ว ส่งมาด้วย kri28735@hotmail.com

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot transfer movies from camera to my computer. have new computer


Check whether the Camera has any settings that has to be selected in order to connect it to the Computer.

If the Computer is not recognizing the Camera/Camcorder, check whether the USB Driver is installed in the Computer or not. Also, the Computer will not recognize the Camera/Camcorder if the USB Driver is corrupted. In this case you may un-install and install the USB Driver is the Computer.

After the Computer recognizes as Removable device, you can double-click on it to view the video files stored in the Memory of the Camera. Then, you can copy and paste the video files to the desired location on the Hard drive of the Computer.

If un-installing and installing the USB Driver does not work then you may transfer the files using Memory Card Reader.
If the Computer has the Memory Stick slot, then you can transfer the video files without using the Card Reader.

Jul 17, 2010 | Digital Cameras

1 Answer

Aiptek camera transfer to cumputer


Using the PC Camera Function
1. Installing the AF Cam driver
You need to install the AF Cam driver before using PC Camera
or video conferencing function.
* If you have already installed the AF Cam driver, skip step 1. "Installing the AF Cam driver" and go to step 2. "Connecting your camera to your computer".

2. Connecting your camera to your computer
2.1 Turn on your computer
2.2 Set Mode dial on your camera to 528dc6d.png
2.3 Insert the USB cable to the USB port on your computer
2.4 Insert the other end of the USB cable to the USB port on your camera.

* Then you can see the camera as removable disk. You can transfer the pictures from your camera to your computer like transfering files from one folder to another.

1. Go to camera folder
2. Select the file/pictures you want to transfer then right click and choose move option (if you want the files to be moved on your computer) then choose the desired target folder or drive.

*you can just copy the files form the camera to your computer too.
select the files that you want to copy then right click, choose copy then paste on the desired folder or drive.

Apr 09, 2010 | Aiptek PocketCam 3M Digital Camera

1 Answer

My sony cyber shot does not get connected via usb to system


[Click here to Download*]


Description

Thisdriver download for Sony digital cameras will work on most Windowssystems and Cybershot digital cameras. This is a USB driver and in caseyou are not familiar with the general approach to installing drivers,it is important that you follow these steps:
  1. Download the Sony driver
  2. Make sure that the USB cable and digital camera are NOT connected to your PC
  3. Install the digital camera driver
  4. Do not try to plug the camera into your PC until you have finished installing the driver and restarted your computer.
Thisprocess may take an extra few minutes, but it helps prevent problemsand ensure the Sony digital camera driver is properly installed. Afterrestarting, the driver will let you transfer files via USB. Simply plugin your Sony camera and you should be ready to go.

Oct 17, 2009 | Sony Cyber-shot DSC-W30 Digital Camera

1 Answer

Sony cybershot 4.1 mp camera I accidently deleted the software to automatically download my pixs on to my pc.How to I get the software????


[Click here to Download*]


Description

This driver download for Sony digital cameras will work on most Windows systems and Cybershot digital cameras. This is a USB driver and in case you are not familiar with the general approach to installing drivers, it is important that you follow these steps:
  1. Download the Sony driver
  2. Make sure that the USB cable and digital camera are NOT connected to your PC
  3. Install the digital camera driver
  4. Do not try to plug the camera into your PC until you have finished installing the driver and restarted your computer.
This process may take an extra few minutes, but it helps prevent problems and ensure the Sony digital camera driver is properly installed. After restarting, the driver will let you transfer files via USB. Simply plug in your Sony camera and you should be ready to go.

Oct 16, 2009 | Digital Cameras

2 Answers

Software and Driver Needed...


Can you provide your camera make/model to offer you a link to download your drivers. Thank you.

You could use a card reader connected to your computer and this would not require any drivers.

Dec 06, 2007 | Digital Cameras

2 Answers

What should I do if my PC still won't recognize the camera after I reinstalled the USB drivers?


If the camera is still not recognized after the USB driver has been re-installed, one of the following situations may apply. "PC Camera" may be selected as the USB setting on the digital camera. Change the USB setting to DSC or select DSC in USB MODE. (This only applies to models with a USB Setting or USB MODE option in the SETUP screen.) Does the LCD monitor on the digital camera show that the USB connection is active (USB, DSC or a USB symbol with an arrow, etc.)? If not, the digital camera and PC may not be connected correctly. Check the items listed below. a) Restart the PC and reconnect the USB cable. b) If the PC has multiple USB ports, connect the cable to a different USB port. If steps a) and b) have both been tried and there is still no USB connection indicator displayed on the LCD monitor, there may be a problem with the digital camera or USB cable. Contact an authorized Fujifilm service center and ask them to check the digital camera together with the USB cable. Refer to the Digital Equipment Repair page for information such as the procedure for requesting checks and the locations of authorized Fujifilm service outlets. The USB driver may not be installed correctly. Download the USB driver from the Digital Camera Downloads page and re-install the driver The camera may not be recognized correctly if it is connected to an added USB interface board or via a USB hub. Always connect the camera directly to the USB port on the PC.

Aug 30, 2005 | Fuji FinePix 2600 Zoom Digital Camera

1 Answer

What should I do if my PC still won't recognize the camera after I reinstalled the USB drivers?


If the camera is still not recognized after the USB driver has been re-installed, one of the following situations may apply. "PC Camera" may be selected as the USB setting on the digital camera. Change the USB setting to DSC or select DSC in USB MODE. (This only applies to models with a USB Setting or USB MODE option in the SETUP screen.) Does the LCD monitor on the digital camera show that the USB connection is active (USB, DSC or a USB symbol with an arrow, etc.)? If not, the digital camera and PC may not be connected correctly. Check the items listed below. a) Restart the PC and reconnect the USB cable. b) If the PC has multiple USB ports, connect the cable to a different USB port. If steps a) and b) have both been tried and there is still no USB connection indicator displayed on the LCD monitor, there may be a problem with the digital camera or USB cable. Contact an authorized Fujifilm service center and ask them to check the digital camera together with the USB cable. Refer to the Digital Equipment Repair page for information such as the procedure for requesting checks and the locations of authorized Fujifilm service outlets. The USB driver may not be installed correctly. Download the USB driver from the Digital Camera Downloads page and re-install the driver The camera may not be recognized correctly if it is connected to an added USB interface board or via a USB hub. Always connect the camera directly to the USB port on the PC

Aug 30, 2005 | Fuji FinePix 2300 Digital Camera

1 Answer

What should I do if my PC still won't recognize the camera after I reinstalled the USB drivers?


If the camera is still not recognized after the USB driver has been re-installed, one of the following situations may apply. "PC Camera" may be selected as the USB setting on the digital camera. Change the USB setting to DSC or select DSC in USB MODE. (This only applies to models with a USB Setting or USB MODE option in the SETUP screen.) Does the LCD monitor on the digital camera show that the USB connection is active (USB, DSC or a USB symbol with an arrow, etc.)? If not, the digital camera and PC may not be connected correctly. Check the items listed below. a) Restart the PC and reconnect the USB cable. b) If the PC has multiple USB ports, connect the cable to a different USB port. If steps a) and b) have both been tried and there is still no USB connection indicator displayed on the LCD monitor, there may be a problem with the digital camera or USB cable. Contact an authorized Fujifilm service center and ask them to check the digital camera together with the USB cable. Refer to the Digital Equipment Repair page for information such as the procedure for requesting checks and the locations of authorized Fujifilm service outlets. The USB driver may not be installed correctly. Download the USB driver from the Digital Camera Downloads page and re-install the driver The camera may not be recognized correctly if it is connected to an added USB interface board or via a USB hub. Always connect the camera directly to the USB port on the PC.

Aug 30, 2005 | Fuji FinePix 1400 Zoom Digital Camera

1 Answer

What should I do if my PC still won't recognize the camera after I reinstalled the USB drivers?


If the camera is still not recognized after the USB driver has been re-installed, one of the following situations may apply. "PC Camera" may be selected as the USB setting on the digital camera. Change the USB setting to DSC or select DSC in USB MODE. (This only applies to models with a USB Setting or USB MODE option in the SETUP screen.) Does the LCD monitor on the digital camera show that the USB connection is active (USB, DSC or a USB symbol with an arrow, etc.)? If not, the digital camera and PC may not be connected correctly. Check the items listed below. a) Restart the PC and reconnect the USB cable. b) If the PC has multiple USB ports, connect the cable to a different USB port. If steps a) and b) have both been tried and there is still no USB connection indicator displayed on the LCD monitor, there may be a problem with the digital camera or USB cable. Contact an authorized Fujifilm service center and ask them to check the digital camera together with the USB cable. Refer to the Digital Equipment Repair page for information such as the procedure for requesting checks and the locations of authorized Fujifilm service outlets. The USB driver may not be installed correctly. Download the USB driver from the Digital Camera Downloads page and re-install the driver The camera may not be recognized correctly if it is connected to an added USB interface board or via a USB hub. Always connect the camera directly to the USB port on the PC.

Aug 29, 2005 | Fuji FinePix 3800 Digital Camera

1 Answer

What should I do if my PC still won't recognize the camera after I reinstalled the USB drivers?


If the camera is still not recognized after the USB driver has been re-installed, one of the following situations may apply. "PC Camera" may be selected as the USB setting on the digital camera. Change the USB setting to DSC or select DSC in USB MODE. (This only applies to models with a USB Setting or USB MODE option in the SETUP screen.) Does the LCD monitor on the digital camera show that the USB connection is active (USB, DSC or a USB symbol with an arrow, etc.)? If not, the digital camera and PC may not be connected correctly. Check the items listed below. a) Restart the PC and reconnect the USB cable. b) If the PC has multiple USB ports, connect the cable to a different USB port. If steps a) and b) have both been tried and there is still no USB connection indicator displayed on the LCD monitor, there may be a problem with the digital camera or USB cable. Contact an authorized Fujifilm service center and ask them to check the digital camera together with the USB cable. Refer to the Digital Equipment Repair page for information such as the procedure for requesting checks and the locations of authorized Fujifilm service outlets. The USB driver may not be installed correctly. Download the USB driver from the Digital Camera Downloads page and re-install the driver The camera may not be recognized correctly if it is connected to an added USB interface board or via a USB hub. Always connect the camera directly to the USB port on the PC.

Aug 29, 2005 | Fuji FinePix 2600 Zoom Digital Camera

Not finding what you are looking for?
Philips J44417 Digital Camera Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Digital Cameras Experts

kakima

Level 3 Expert

96467 Answers

logcabiny

Level 1 Expert

24 Answers

mars6728

Level 1 Expert

9 Answers

Are you a Philips Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...