Have got a secound hand printer, plugged it in, downloaded driver but even before i did that I switched printer on, green light came on then it went off and 2 red lights are flashing on and off on ink button and paper/waste bin button and nothing is working canyou help me?
Hello yes i having same problem i went to print out a microsoft greeting card from publisher i have an Epson Stylus C65 pinter and when i wnt to print it all the lights were flashing and then i saw the paper had jammed so i tried again and it is still doing same thing can anyone else help with this problem. I am Barbara Mackay I am 61 years young
I fixed it by completely ignoring website that say they are free, then when you go into them they ask to choose a package deal like your site diid and because i do have a visa card, a cheque book or pay pal this is very annoying for me and also being a female is very frustrating. Thank you for trying to help me but no thank you. Babsey 48
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Power off printer, remove power plug from printer, remove usb cable from printer, pull out paper and check for jams, check toner cartridge, clean area underneath the toner cartridge head, uninstall printer from windows control panel, reboot computer, plug-in printer with a different working usb cable, plug in power to printer, power on printer, reinstall printer driver. All in those steps exactly. If that doesn't work I would say you have a bad printer on your hands.
Normally the micro switch that decides to charge battery or use main power goes, its a known fault in laptops today , its a big job to replace them . your best bet is to search ebay for a secound hand board or even the same laptop for parts and replace your main board. hope this helps you in some way.
oh when you plug in the main adapter hold it in a angle slightly for 5 secounds and see if it reconizes its plugged in try figure if its a conection problem on the laptop itself. but i think myself its the micro switch on the main board that is fualty.
there is 3 possible problems i think here, one the conection to computer is faulty, 2 the battery it selfs is busted wont hold its charge, 3 there is a switch that decides charge and no charge on main board and its faulty, if its number 3 its a big problem very hard to replace if you have warenteee that is your safest bet or search ebay for a secound hand board, 2 try another batter to see if it holds the charge, 1 wiggle the conection to see if you see any charge goign to batter at any one time, is all i can say to help you here. hope this helps
To pin it down to a hardware fault, you may need to remove the printer from the usb port, uninstall driver and re start pc.
Check your printer and faxes folder to make sur there are no other canon printers listed, if so delete.
Re install printer driver, then when prompted connect printer to a different usb port and see if windows recognises your printer and is installed ready to use.
Try again and if the same problem you know it's the printer thats faulty