I have a DI67. It beeps when I switch it on (as normal), and the second of the 4 lights comes on, but then it does absolutely nothing.
I have checked the filters (all clear), I have tried tilting it too but no water drains out when I do this.
-   starts as normal and tries to fill up but no water comes through + starts bipping + flashing (1st or 2nd light, not sure now).-   alex_wickens
Solution #1
posted on Sep 29, 2008
Guest
Rank: Apprentice
Rating: 0%, 0 votes
Check the carbon brushes are traveling within their housings.
on any cycle dishwasher drains, then fills but does not wash - is it the main motor or could it be...
(More)
on any cycle dishwasher drains, then fills but does not wash - is it the main motor or could it be the motor start cpacitor?
When I turn the d/washer on the main switch, The pump starts trying to pump and the first cycle...
(More)
When I turn the d/washer on the main switch, The pump starts trying to pump and the first cycle light starts to flash. That is as far as it will go through cleaning cycle! I've unplugged and tried to reset but always the same problem? Thanks
My dishwasher is approx 10 yrs old works fine but does not clean - the filters are cleaned out and i...
(More)
My dishwasher is approx 10 yrs old works fine but does not clean - the filters are cleaned out and i have put a dishwasher cleaner through it
The light that indicates the salt is always on, despite that i done it twice. Plus the dishes dont...
(More)
The light that indicates the salt is always on, despite that i done it twice. Plus the dishes dont come out clean and often covered in a white powdery substance. Any ideas. I havent use it much because of it. it is such a waste of money. Thank you