Looking for quinny zapp xtra adaptor for seat

Hi Yeska

The Quinny Zapp / Quinny Zapp Xtra is not suitable to use with a carrycot. Due to the lightweight and short wheel base of the Quinny Zapp / Quinny Zapp Xtra use of a carrycot is dangerous as it may cause instability and tipping.

The chassis can be used with a Maxi Cosi Pebble or Maxi Cosi CabrioFix carseat from birth. The Quinny Zapp Xtra seat unit can be used with the From Birth Inlay for suitability from birth.

Hi Maria

If you have a 2011 model Zapp Xtra seat unit the bumper bar is not suitable to use on it.

The bumper bar accessory is only suitable for 2012 model Zapp Xtra seat unit onward. On the back of the seat unit there is a manufacturing sticker which shows date of production, which will tell you if your seat is suitable for using bumper bar accessory.

Hi David

At the moment the Quinny Zapp Xtra with folding seat unit is only available in the USA.

If you are in the USA please contact [email protected] to ask them about compatibility between the products you have and the new Quinny Zapp Xtra folding seat unit.

If you are not in the USA we must advise you not to attempt to combine your products with a USA Quinny Zapp Xtra folding seat unit as the products have not been tested or approved in combination.

Hi

Go to www.quinny.com select the country you're in and select the product you have. A copy of the user manual can be found here.

Hi

Quinny cannot advise the use of non-official Quinny products with the pushchair.

The Zapp Xtra bumper bar is not compatible with the 2011 model Zapp Xtra seat unit as modifications were made for the 2012 model seat unit to be compatible with the bumper bar.

Hi

No the new Quinny Zapp Xtra sun canopy is part of the seat fabric.

If you wish to turn your standard Quinny Zapp into a Quinny Zapp Xtra you need to purchase the Quinny Zapp Xtra seat unit as an accessory from your local retailer as it will have the seat frame and the adaptors required to fit it into the chassis you have.

Visit www.quinny.com to find your nearest retailer.

Yes the new seat unit can be used with old zap.You remove the fabric seat (look on u-tube if you don't know how)the new seat unit then fits on to frame via the addapters that come with the xtra seat unit, at the point where the car seat addapters fit.There is a large push button on the top of the seat unit which you push in to recline or sit up the seat, and a little one too next to it, that needs to be pushed away from the larger one, while you hold the large button down when you want to remove the seat unit.I found fitting the xtra seat very easy.To fold the zapp you Must remove the entire seat unit as it won't fold with it on, unlike the old one.

Good Afternoon

Replacement recline adaptors can be ordered via your local Quinny retailer or direct from the customer service department on 01284 413 141 Mon-Fri 8.30-4.30. RRP is 25GBP and if ordered direct there will be 3.99GBP p+p charge.

If you have ordered a standard Quinny Zapp seat fabric there are no adaptors required as it fits exactly the same way as your original seat fabric. If you have ordered a Quinny Zapp Xtra seat unit it should come complete with two metal recline adaptors to use it in your chassis. If it does not, speak with your retailer.

This site has most of the Quinny manuals
www.karlisles.com.au/baby_repairs_spares/instruction_booklets