Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive
I have a usb flash drive of 2 gb capacity. this usb drive was working properly but last week when i tried to connect it to computer , xp dectects the flash drive but does not open it. when i try to open it window says that it is not founding any flash drive installed. i also tried to format the drive but it is also not working, in disk management the drive is detected but not working, and it shows ' no media' in disk management right pane.
When that happen try going into the device manager area >>> start >>>
control panel >>>system >>> hardware tab >>> device manager , now notice
your usb controllers area , its mostly likely open and if so ?
See if you notice a little yellow exclamation mark http://en.wikipedia.org/wiki/Exclamation_mark by it , if so , right click on it
and select delete , then highlight your computer name http://en.wikipedia.org/wiki/Naming_scheme on the very top of the
devise manager , select " Action " and then select " scan for hardware
changes , at this point your compute should now notice your usb devise , by
the way make sure when you are performing this that your usb devise is plug
in , See if that helps.
Else refer to this website http://www.uwe-sieber.de/usbtrouble_e.html
This site every issue related to USB device.
I am sure this will surely fix your problem.
Thanx for using fixya,
Posted on Sep 26, 2008
Tips for a great answer:
Nov 05, 2016 | Hard Drives
Apr 17, 2011 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive
click start control panel administrive tools computer management disk management right click on your drive select properties then security select take full control in windows 7
USB drives can be write-protected by modifying the StoreageDevicePolicies Registry key and WriteProtect Registry value.
click Start>run>regedit to open Registry Editor. and press control+F to open the find dialogue box and type "usb device" or "driverdesc" to open usb mass storage device or type "usb mass storage device" in the search windows. And right click on it and delete. This will set the policy value to 0. then insert your usb device. It will work fine.
# Remember: do not delete any unknow files in the registry as this will make some programes not work as usual.
If you are running a Windows XP OS then you might be able to:
- click start right click on my computer select open
- Right click the icon of your Flash Drive (It should be F:/ or something)
- Click Properties in the menu that comes up
- Click the Sharing tab
- Click permissions
- And finally, click Allow next to Full Control.
hope this helps
Feb 24, 2011 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive
Feb 12, 2011 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive
Sep 11, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive
Sep 10, 2010 | Hitachi 120GB Hi-Speed Mobile Disk USB 2.0...
May 25, 2010 | Hard Drives
Apr 06, 2010 | Seagate FreeAgent Pro - 500GB, 7200 RPM,...
Jun 05, 2009 | Western Digital My Book Essential Edition...
May 30, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: