An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: SPEAKERS CUTTIN OFF
Trying to push to much bass here try this turn the head unit half way up and then go back to amp and turn the level nob all the way down and then turn it up to u hear it start to cut out let me no if that helps please rate if u have any more q and a's let me no
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It seems you needs more power to maintain the level of good sound.Maybe the maximum volume is 30 - then the mininum is 15 and you can't hear any cracking sound. If you exceed 15 the minimum, as you said starting 17 - 20 you hear crackling sound .Then you reach ,what they called the "cliping level"so much distortion and crackling sound,your stereo too small to accomodate .You must add a power amplifier so crackling will gone and to fit your listening pressure...
I believe the power problem is related to the Remote wire which should be blue or yellow. The remote wire is suppose the turn the Basslink on and off when the radio is turned on and off. The yellow wire is normally used for power antenna. Traditionally the remote wire is blue.
You can use a Speaker level adapter and splice in with the L/R rear speaker wires, and the adapter will convert the speaker level to line level. The output of the adapter will go to the Rear speaker input on the basslink., Write back if you need more detail on the adapter.
Hello.. I am sorry to hear you are having a problem. If you have had your speakers changed out recently, it could be that one of the speaker wires or terminals are touching a metal part of the car. What happens is the aftermarket stereo detects this problem and it shuts down all of the outputs to keep from burning up. So all of your speakers going out is a good thing because your stereo protection is working as it should. You can cut all of the speaker wires loose behind the radio and hook them back up one at a time and when the radio cuts off, that will be the bad line. I am assuming of course that you dont have them hooked to an aftermarket amplifier. Even if you have not changed your speakers, it is still a protection circuit that will detect a bad speaker as well. Sudden jolts, braking, etc. can cause a bad speaker to fault. Hope this helped!! Good luck with your venture!
You did not specify the year of your mk5. The first model year sold in North America with either the standard or the Monsoon radio has 6 1/2" speakers in both the front and midpanel.
www.crutchfield.com has a great feature called "outfit my car" which will lead you directly to all of the speakers which will fit. They will also tell you if you need to drill any additional mounting holes, use any spacers or adapters, or use any special wiring harnesses. If you purchase from them, Crutchfield includes any such incidentals at no additional cost. And if you are a new Crutchfield customer, and use a "friend referral code", such as mine, which is p7sdj-hrx8q-9800g, and your order totals $200 or more, you get a $20 discount. And I get a $20 merchandise credit on a future order.
sounds like one of the speakers are blown or the cone is deteriated/ripped.when turned up this causes yhe coil wires on the back of the cone to touch the casisng shrting it out.upgrade/replace standard speakers with new to rectify.thanks please rate me.
You just have to check all of the speaker wiring.It's a wire touching somewhere and it will do that till you fix it. What it is is just where the negative wire which is the ground for your spreakers it's touching the positive wire which is know as a power wire.When this happends it lowers the frequency of the volume which will cause the speakers to cut out and volume level to drop.