a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To reset your RoadMate please follow these steps :
1: Locate the button marked "Reset" on the left, right or bottom of the
2: Using a thin object, such as a paper clip, depress the button for two to
three seconds. The unit should reset.
3:If the unit does not reset, immediately press the button again and hold
it for up to 10 seconds.
NOTE : Please don't attempt to perform a factory reset on the Roadmate or Maestro GPS
units by holding down both the "Reset" and "Power" buttons. This will
cause the GPS unit to format its own hard drive. Doing so will erase all
data, including the GPS software, from the unit.
This solution should help with your problem . If that didn't help , then I recommend you call Magellan service for help .
It is not a matter of just copying the GPs map program to the card. You have somehow deleted the Invion Formatting back to Windows CE.
Special programs are used to get the invion program written into WinCE and then to apply the Icons specific to your GPS like PHOTOS and VIDEO etc.
These programs are installed using the reset and on buttons to get them to boot much like haveing a CD boot up other than the HDD The process of reinstating these to get the maps on and working is about 45 minutes and then the maps can be loaded. At $120 an hour the $40 fee is cheap, so if you want your GPS to work i would take up the offer
Try to press and hold the power button for 15 sec when the unit is off
then when the gps on check if it will go thru but if it is not try to press the reset button for 10 sec and then release.
if still not work try to charge the battery sometimes the cause of the freezing of the screen is when the unit is low in battery and also check the website if there is a new firmware for your gps if there is download it.