Whirlpool washing machine imperial series My washing machine is shaking hard when it spin dry

Make sure it's blowing air out the vent outside. But even though it's heating doesn't mean it's heating 100 percent so u might need a heating element. Not to expensive to buy and often not to hard to change, refer to owners Manuel or a computer on how to change it.

What is the model number?

Hello here is a tip I wrote on how to solve the problem of your unit not spining most of the time it is the drive couple in a whirlpool http://www.fixya.com/support/r9075378-washer_not_spining_top_loader_part if you have any further questions after reading the tip and watching the videos attached message me back Thanks Rick
Please remember when our chat has fully concluded to rank how this opinion has helped in your appliance situation it allows me to continue helping others in similar situations in the future.

CHANGE MOTOR COUPLING

This problem is almost always a broken belt. Yes you can do it yourself.
Go to repairclinic. com and put in your model number for the exploded view of your dryer. Locate the belt part number and belt orientation.

Check that the rollers that support the drum are not flat on one side.

check relays and main fuction switch

as with basic spin faults -a number of reasons usually 1 motor brushes, 2 motor 3 motor control pcb or the obvious one - the belt has come off.

it sounds like a worn clutch.

spin speed is the same just doesnt run as long on delicates cycle