Question about Mitsubishi WS-55809 55" Rear Projection Television
When I hit the power button the timer light blinks and the TV turns off. Is it worth it to repair?
Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.
If ever resetting is no effect then the problem is in the "DM board"
The constant blinking green light means that the TV is not booting up. This is a common problem on this set. Hope it may help you; Regards, VOTIT
Posted on Sep 26, 2008
Tips for a great answer:
Nov 06, 2015 | Panasonic Projection Televisions
Oct 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...
Diagnosis: If none of the above test resolve the issue, then the failure lies in one of the following:
Feb 28, 2011 | Mitsubishi WD-62525 62" Rear Projection...
Nov 15, 2009 | Mitsubishi WD-62725 62" Rear Projection...
Jun 29, 2009 | Mitsubishi WD-52628 52" Projection HDTV
May 26, 2009 | Mitsubishi WD-62725 62" Rear Projection...
May 09, 2009 | Projection Televisions
Nov 23, 2008 | Projection Televisions
Jan 21, 2008 | Projection Televisions
Nov 09, 2007 | Projection Televisions
Mar 17, 2016 | Mitsubishi WS-55809 55" Rear Projection...
528 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: