Keyless remote How can I get my keyless remote programed? Does anyone know how to do that?

Hello Cathy

It does indeed have keyless entry. It needs reprogramming when you get a new remote. Also if you disconnect the battery. Usually a local car alarm fitting shop, or an auto-electrician will do it. Plus of course a Ford dealership.

https://www.google.com/search?q=Keyless+Entry+Remote+System+1999+Ford+Windstar

..

I did a quick search on google, this was the first hit

https://itstillruns.com/program-keyless-kia-remote-5839672.html

I bought a remote hst 2524 but i don't know how to program is into Chevy's Equinox 2009??. If anyone know please give me some advice. I am appreciated.

There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote.

Hi.

To program ( or reprogram ) a keyless entry remote transmitter into the remote keyless entry module, perform the following steps:

1. Turn the key to ON or ACC and short the two terminals of the program connector, a two-pin connector located below the driver's side of the instrument panel at the base of the steering column. All doors should lock and then unlock.
2. Press any button on each keyless entry remote transmitter in turn. All doors should lock and then unlock. If the door locks do not respond, press the button again (up to three times maximum with the same keyless entry remote transmitter). If the door locks still fail to respond, go to Pinpoint Test A.
3. Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up to four keyless entry remote transmitters maximum).
4. Turn key off.
5. Remove the short from the program connector. All doors should lock and then unlock.
6. Verify that the keyless entry remote transmitters have been successfully programmed by pressing the LOCK or UNLOCK button on each one, and observing that the system responds by locking and/or unlocking the doors.


I hope this helps you.

Thanks!

You need to return the remote to midwest keyless and either tell them to give you a remote with the exact part number or buy one off of ebay. They are about $60 from the dealer. When the doors lock and unlock, the computer is telling you that the brain is now in learning mode but it is a must to have the correct remote. I have programmed thousands of keyless remotes so please believe what I say. You can program up to 4 remotes for one car but they all must be programmed at the same time. If you buy one remote and program it then get a second remote at a later date, you need to program both simultaneously. If you just program the second remote, the computer will no longer recognize the first remote. That is just some extra information for you. Let me know if you need any more help.

DEALERSHIP WINS THEY HAVE TO REPROGRAM KEYLESS REMOTES.

Unfortunately there is not an easy answer for this. Volvo remotes are difficult to program and most mechanics and / or locksmiths won't touch them.

My company does sell these remotes, but like I said above, it is difficult to find anyone to program them. If you take it to the dealer, they will want you to purchase the keyless entry remote from them, and of course charge you a huge fee!

If you can find a locksmith or mechanic in your area to program a keyless entry remote for your Volvo I would suggest purchasing the remote online and save some cash. https://www.keylessentryremotefob.com/Volvo-Key-Fob-Remote-Replacements-s/1855.htm

hi, i hope this helps..as far as the tire monitor, it might solve it, not likely...and if your keyless remote is not programmed to your car, it will need to be, however there are alot of independent shops that will have the interface computers needed to help ya and cheaper..

Make sure you have inserted battery correctly in key. If it doesn't work on one side, flip it on the other. Should work..