Question about Kodak EasyShare DX7630 Digital Camera

1 Answer

Kodak dx7630 The lens does not retract and it does not recognize a fully charged battery. I even tried to connect it to 5v DC supply( as per KODAK instructions). Nothing seems to work. Any suggestions.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn the lens slightly towards the way it is supposed to retract.

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery lock broken, needs replaced camera will not turn on with a fully charged battery


I had the same problem and was able to find a replacement lock and spring on e-bay from US Camera - P/N 370388337496). They may have none left. Not sure.

I have no instructions on how to install the replacement, but don't think it should be that hard (haven't installed mine yet). It is called a Kodak DX7630 Battery Latch and Spring Assembly.

You can also contact United Camera Customer Service (1-630-595-2525) and talk with them. They are the company that Kodak will send you to for repairs to your DX7630.

The part number From Kodak PartsDepartment (1-800-431-7278 (opt #2) is: F6170 for the latch. The did not have any springs on hand.

Jan 27, 2011 | Kodak EasyShare DX7630 Digital Camera

1 Answer

M863 lens extends and then immediately retracts


Kodak Easyshare cameras use Li ion batteries, as recommended by the manufacturer, which have higher voltages but not necessarily higher amp hours per battery pack.

When I first bought my 14.1 megapixel camera from Kodak, I tried various batteries, including Alkaline, Ni MH, and they didn't work very long before needing replacement or recharging.

This is because the voltage isn't enough on other batteries.

I do not understand why they make it this way, because it fooled me a lot. I thought that since it had a AA format that it would be alright to use AA batteries of any type in the camera. But, this is not so, in my experience.

Good luck getting your camera to work with new Li Ion Batteries.
Note: if the Li Ion batteries do not work, then there is something wrong internally with your camera.

Contact kodak.com to see if it is economically repairable.

Thanks for asking a question on Fixya.com.

Jul 24, 2010 | Kodak EasyShare M863 Digital Camera

1 Answer

THE LEN IS STUCK ON EXTENDED POSITION AND WILL NOT RETRACT TO THE OFF POSITION? BATTERY WAS FULLY CHARGE.


If no power on the camera:
Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Turn on your camera without the memory card.

If there is power on the camera, bnut the lens is stuck:
This is a lens error. KODAK suggests a repair for this fault.
However due to spare part shortage this model is no longer repaired. Instead KODAK offers a trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Dec 10, 2009 | Kodak EasyShare DX7630 Digital Camera

1 Answer

Lens does not retract even with new batteries. How do I remedy this problem?


Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 27, 2009 | Kodak EasyShare C613 Digital Camera

1 Answer

My camera will not stay on is off and stuck with lens out


If the lens doesn't retract on most digital camera the camera also will not turn ON. It is connection or wiring between camera power and camera lens.
What Kodak Rep will ask you to do are:
1. Remove the battery and the memory card of the camera
2. Check if your using a recommended battery and if its new or fully charge. batteries for Z1275 are Ni-MH rechargeable; CRV3 Lithium; 2AA Lithium
3. Insert the batteries back in the camera in correctly
4. Set the camera in Auto mode (its the camera icon on the dialing mode of the camera)
5. Try to turn it ON
If still will not turn ON and the lens will not retract
6. If your using a rechargeable battery Kodak Rep will ask you to charge the battery until its fully charge.
If your using a disposable battery they will ask you to try to use a new battery out from the box.
After all those steps still the camera failed to work, it will be send for repair. The number of the Kodak support line is 1 800 235 6325 (23KODAK)

Nov 20, 2009 | Kodak EasyShare Z1275 Digital Camera

1 Answer

My Kodak Easyshare V1233 will only power up when plugged into the wall charger. Even after staying on the charger it will not power on unless plugged in.


Kodak has 3 types of charger that can be connected to a wall socket
USB AC Adapter - is especially useful when traveling, away from your computer, or just plain on-the-go. Connect your camera's USB cable to the adapter and plug it into a wall outlet to conveniently charge your camera.
5V AC Adapter - Provides in-camera charging for all KODAK EASYSHARE M and V Series Digital Cameras
Input: AC 100-240 V 50/60 Hz Output : DC 5.0 V
3V AC Adapter - Provides direct power to your camera but it will not charge the camera battery
Input: AC 100-240 V 50/60 Hz Output : DC 3.0 V

* You need to check the type of adapter your using. If your using the 5V AC adapter or USB adapter and the camera won't charge the battery contact kodak support line 1 800 235 6325 (23KODAK) for possible repair.

Nov 16, 2009 | Kodak Easyshare V1233 12.1MP Digital...

1 Answer

Lens won't retract. Camera powers off immediately after powering on without retracting lens. New battery didn't help.


Are you using the recommnded battery KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-7004

first you need to do make sure the battery is fully charged., now if you if this solution will not resolve the issue it means that the Gear Lens is defective thats why your Lens will not retract and camera will not stay On. you need to call kodak to send your camera for repair call toll free 1 800 235 6325., Gudluck!

Oct 31, 2009 | Kodak EASYSHARE V1253 Digital Camera

1 Answer

Kodak EasyShare One lens won't open - camera cycles on/off


I had the same problem. Even though I was keeping the camera on the dock all of the time to charge it, the solution was very simple - get a new battery for inside the camera.

I bought new ones at a greatly reduced price on eBay. Now I carry one with me wherever I go in case the battery wears out/down.

I shoot a lot of videos, so it really takes a lot out of the batteries.

Dec 15, 2008 | Kodak EasyShare One Digital Camera

1 Answer

Kodak Camera V610 easy share


Hi!
This is what I need you to try..
If you're using a 5v ac adapter to charge the camera's battery - please hook it to the camera WITHOUT THE BATTERY in it. The 5v ac adapter can be an alternative power supply.

Turn on the camera - check if it would do the same thing - like lighting up, making a noise (attempting to extend the lens) and closes. If it does, the camera needs to be sent in for repair.

visit www.kodak.com/go/itg to arrange repair

If you are using a photoframe dock2 or camera dock series 3 to recharge the camera's batt - use its 5v ac adapter. It will work with the cam. Make sure, the batt is not in it to check the cam's condition, isolating the possible interference of the battery.

If the camera works fine - when the AC adapter is attached, no battery in it - consider buying a new battery.

V610 is a very nice camera, but it was manufactured in 2006. If you have not replaced the battery yet, it might just need to be replaced. Even Li-ion rechargeable batteries wear out eventually - it can only last up to 300 charging cycles.

If you're using a batt that is less than a year old, the cam might just need to be sent in for service.

Nov 24, 2008 | Kodak EasyShare V610 Digital Camera

1 Answer

Kodak easy share z612 will not turn on to take a picture


When the battery dies, usually the camera will retract the lens if possible. If the battery is so dead the lens can not retract, I would recommend trying to charge or change the battery. Or try to turn the camera on, and then manually shutting it off if you can.

Nov 16, 2007 | Kodak EasyShare Z612 Digital Camera

Not finding what you are looking for?
Kodak EasyShare DX7630 Digital Camera Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...