Question about Whirlpool Washing Machines
I went to Whirlpool's website and went under Help with a Product and found the answer.
Posted on Sep 26, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The SUD message relates to overdose of detergent detected during the Wash Cycle. This may signify a bad pump, an extra heavy load, excessive detergent or excessive suds. If too much detergent was used, run the washer through a Rinse/Spin cycle, then a Normal cycle, without adding any detergent. This should clear the unit of the excess detergent. Check the drain hose and make sure it is not plugged or kinked. Good luck
Posted on Sep 06, 2007
An explanation of your error code can be found at the following link:
In a nut shell, usually one of the motor windings fails, causing the Drive Motor to not rotate at the correct rpm, or not at all. Or, the Motor Control Unit fails. Both are simple repairs and can be accomplished by the average do-it-yourselfer. If you wish to attempt this repair, let me know and I can give you the steps required to complete it.
These parts can be found at searspartsdirect.com. Just type in your model number and look under the "Pump and Motor Parts" heading on the next page. The MCU will be listed as item number 1 (part #8181693). The Drive Motor is listed as item number 16 (part #8182793). You can also try repairclinic.com, pcappliancerepair.com, and partsstore.com for comparative pricing. If you require further assistance, please let me know.
Posted on Jun 28, 2008
SOURCE: whirlpool duet washer code
I'm Harvey the Master Plumber
You want to know what code dL means on a whirklpool duet washer.
This is what works for me 99% of the time:
Simply unplug the washer for ten minutes. The onboard computer will reset and work like new.
Please understand that you are not being shortchanged. There are hundreds of codes and with this new computer tech. they mostly require a repareman. To save you money the manufacturer has designed it to reset itself after ten minutes to solve most problems. Try this first, you can always call a local pro later if you want.
Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Harvey your Master Plumber
Posted on Sep 11, 2008
Tips for a great answer:
Jan 30, 2016 | Dryers
Jan 08, 2016 | Washing Machines
Nov 30, 2015 | Washing Machines
Jul 13, 2015 | Whirlpool duet Washing Machines
Jan 11, 2013 | Whirlpool Duet GHW9150P Front Load Washer
Jul 26, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Dec 01, 2009 | Whirlpool Washing Machines
Jun 29, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Feb 15, 2007 | Whirlpool Duet 3.8 cu. ft. Front Load...
Apr 26, 2018 | Whirlpool Washing Machines
Apr 20, 2018 | Whirlpool Washing Machines
217 people viewed this question
Usually answered in minutes!