Question about Logitech QuickCam Express Web Camera

1 Answer

Camera self activating

Never had a problem in 3 years. Great little thing. Now it has been self-activating for the last 3 weeks. 1st week before l installed a further 512mb of RAM and for the last 2 since installation. I have reinstalled it 3 times. Personal opinion is l have a hacker. I have not installed any additional software except Norton 2009. I did have problems with 2008 so Norton installed it free of charge. Geek Squad assured me l have no viruses and all my updates are up to date. When l hear the hard drive activate the camera clicks on and l was initially unable to turn it off. After a lot of frustration and pulling it out of the back of my computer l found that if l went into MSN and activated tools then audio and camera set up that if l clicked none the light would go off, then if l clicked on it again and the light would go back on and upon clicking finish it would stay off. Microsoft recommended checking out the camera first before reporting it to FBI. I also notice increased activity in the processes on programmes that l was not using at the times of the activations. Help!!!! Please tell me that it is just a software conflict or that there is a way to ensure that l can switch off automatic activation and that l do not have a hacker.

Trish

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 181 Answers

If you open the norton product means you can see a firewall just go ahead turn off the firewall,and if its not resolved means open and norton product and run the scan and maku sure you dont have any suspicious vvirus like that and then another step is like uninstall and reinstall the norton product and check still if you are facing the issue ..after that if you are facing the issue means contact your web cam vendor they will help you

Posted on Mar 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Kia Sportage Misfire on Cylinder 3


run a compression test on all cylinders to rule out head gasket or burned valve.

Mar 03, 2017 | 1997 Kia Sportage

1 Answer

I have a crystal ihd 6000 system on my boat and it sounded great for the 1st few weeks.......now only 2 speakers work and it reads invalid when trying to set up the other channels.....


Corrosion. TIme to open it up and spray the switch contacts and controls with a contact cleaner. This includes any jacks. My preference is for LPS 1, it cleans well and leaves little residue. I know some people who trust WD40 with their electronics, I would only consider it as a last resort as it has a reputation of gluing things together.

Jan 16, 2012 | Radio Communications

1 Answer

Last summer we installed a Intex salt water filter it worked great for about 2 1/2 months. It stopped working, Checked the power supply nothing was coming thur it. Intex relpaced it under warranty. Started...


This could be a flow problem and you will need to check your pump baskets for junk and make sure your filter is clean. Also you can check your flow switch to be sure it is working.

Aug 13, 2011 | Intex Automatic Salt Water System for ...

2 Answers

I keep putting in new or recharged batteries and every time I get ready to use my camera if it over a week, it says change the batteries. This has just started happening the last 3 months. The camera is...


The rechargeable batteries, especialy NiCD and NiMH ones, loose they're charge over time. Even if fully charged, they loose all of the charge within a week or two. This is not a malfunction.

However, if you are using alcaline batteries and still get this problem, probably you have some electric problems inside (maybe some batteries leaked in the past). In this case try cleaning the inner contacts of the battery slot. If the problem persists, go to a local electronist for repairs.

Apr 12, 2010 | Canon PowerShot A570 IS Digital Camera

1 Answer

Sony DSC H5 runs down batteries very rapidly. Much faster than when the camera was originally purchased. A pair of new AA batteries only lasts for 12 - 24 photos. Brand new rechargeables fully charged are...


Hi there please reset the camera 1st . THen pair your battery with your camera. Go in menu then battery type option. Select the type of a battery. After that save the setting. Now try . If you face the same problem then the camera internal power transformer are damaged or week. So you need to replace that transformer after that it will start work properly. You use that camera so long, that's why there is a chance of that damaged. Thanks if its helpful then rating me.

Mar 15, 2010 | Sony Cyber-shot DSC-H5 Digital Camera

1 Answer

Kodak easy share digital camera m863


I have a Easy Share M863 and have had it less than a year. It was working great and then last week I tried turning it on and it would not open. I thought it might be the battery needed charging so I did that. It still will not open. I contacted Kodak and they told me they would give me 15% on a new digital camera. That is not what I wanted. My camera is not even a year old. It should have lasted longer I think.

Jun 08, 2009 | Kodak EasyShare M863 Digital Camera

1 Answer

Ricoh KR-5 SUPER II Shutter will not activate.


I doubt you still need help with this considering it's over 8 months later... but the same thing has been happening to me lately, I've had to force the self timer to start by giving it a little push, once it gets going it starts to work normally again.  

Jan 19, 2008 | Ricoh KR-5 SUPER II 35mm SLR Camera

1 Answer

Problem uploading pictures


Remove any Camera CD software and let Windows try for its self Come back with the result.

Sep 23, 2007 | Fuji FinePix A360 Digital Camera

Not finding what you are looking for?
Logitech QuickCam Express Web Camera Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...