Question about HP Business InkJet 2800 Printer

1 Answer

HP Business Inkjet 2800 Problem

Ran out of ink, installed new cartridge, but printer shows the new cartridge as empty. Tried another new, same thing. Then tried a cartridge out of another HP printer that was working there and it shows as empty.

Posted by on

  • Anonymous Mar 27, 2014

    cartridge printer date

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

There is a sensor which recognises the amount of ink u have in ur cart. if that sensor doesnt work, then printer will not recognise the ink in the cart. Try cleaning the copper contacts on the printer cart slot. if no go. look for service..

Posted on Oct 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP 8500 dumped all the ink out of a new cartridge behind cartridge section.


That's unusual but was cartridge properly installed? did it give you any warning msgs? if u are going to install new cartridge, check if installation ok. Then using tool menu, clean and then alligne. Do a test print thru start - printer and dvise tab.

Aug 15, 2013 | HP Business InkJet 2800 Printer

1 Answer

Magenta cartridge leaked for some unknown reason. when we replaced it, it says the new cartridge is empty. Please help.


Hi

My friend the cartridge which leaked earlier has spilled ink in side on the contacts of the printer where the smart chip comes in contact. Try to clean well with a tissue paper and try to insert slowly into the printer and this will solve the problem.

If not then carefully remove the smart chip from the old one and replace it with the new and install back in the printer.

Take care.

Jul 14, 2011 | HP Business InkJet 2800 Printer

1 Answer

My hp business inkjet 2800 prints blurry even after replacing heads and run heads alignment and cleaning procedure. Is there anything I could do to solve this issue? thanks



Forgive me for asking this, but roughly speaking about 80 to 95% of problems involving ink or toner are resolved by the following:
Are you using a factory new ink cartridge supplied by the manufacturer of the printer?
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
Don


Nov 30, 2009 | HP Business InkJet 2800 Printer

1 Answer

Hp business inkjet 1200, replaced ink cartridge


the error's you were getting on the CIS could have been from the chip. Try setting the date back on the computer or on the printer back 1 year. See if that makes a difference (if you still have the CIS and the printer). Best advice, get an updated chip.

Nov 22, 2009 | HP Inkjet 1200dn Printer

2 Answers

New ink cartridge won't print


Do you know for sure the original cartridge was empty? Take a clean pencil with eraser, and gently "erase" the electrical contacts on the cartridge and the printer where the 2 connect. See if that helps. If it is USB, unplug it and plug it back in. You might try to uninstall and reinstall the driver for the printer.

Aug 26, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Error message on HP 2800 business inkjet, message reads 1% ink left on brand new cartridge


Hello,

View the user manual here. http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00449611/c00449611.pdf

go to page 60 and follow the instructions for replacing the ink cartridge, remember to have the printer on when you do.

Then go to page 62 and allign the print head automaticly following the instructions it gives.

This will re-callibrate the ink level on the printer and should read correctly for you.

Thanks
CompuFirm

May 27, 2009 | HP Business InkJet 2800 Printer

1 Answer

Won't Print After Changing Ink Cartridge


Did you pull the plastic tape off of the cartridge?

Jan 29, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP BUSINESS INKJET 2800 SERIES OUT OF THE BOX WON'T PRINT BLACK


Usually this happens when the black cartridge is out of ink or when it is damaged.
Try to print with a new black cartridge

Dec 12, 2008 | HP Business InkJet 2800 Printer

1 Answer

How to reconfigure ink cartridge


Change your system date to backward and you can use it again

Oct 23, 2008 | HP Business Inkjet 1000 - Printer - colour...

Not finding what you are looking for?
HP Business InkJet 2800 Printer Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...