I bet that did not work. I had this problem on all three of my Okidata LED printers... right out of the box. And after replacing drums and toner. After tons of research I found that this is a side effect of LED technology.
The effect worsens when the stock is thick (cardstock) and coated (glossy finish).
Compared to a magicolor 7450 II the quality really is horrible.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Oct 6, 2014 - Uploaded by Toner Man
How to reset your OKI C3300 C3400 C3600 laser printers drum unit ... drum message you can install the chip on your drum unit and continue printing. ... Replacing the Transfer Belt on an OkiC3000 Series Printer - Duration: ...
AJUST REGISTRATION, press EXECUTE
Performs automatic colour registration
adjustment. Normally this is done on power
on and when the top cover is opened and
then closed. This process accurately aligns
the cyan, magenta and yellow images to the
I have had the colour duplicate because the client had used the incorrect toner, if you remove all four drums and toners there are two blue screws to undo , the transfer unit comes up and out. You will have to remove the white waste toner bottle from the belt unit. Remove the two screws holding the blade onto the unit clean the build up from under the blade and repowder the blade with standard setting powder. Put it all back together and test.. Fixed my problem when I was in the field once.
Not able to print a status page. Tried holding down menu 5 sec and no output. I searched the menu and am not able to find how to print status page. I did print out a demo page and the black is great but when i print out text (like the entire menu map) the black is grey. Let me know if there is anything else I can do.