An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert who has written 20 answers of more than 400 characters.
Re: F380 All-in-one Deskjet
What sort of document are you trying to print (Word document, Excel spreadsheet, something else)? Also, what kind of paper are you using? Certain types of paper can stop progressing through the printer for a variety of reasons, regardless of the document type.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Remove the jammed
paper. Unplug the printer from the mains and PC. Inspect the rollers, etc for
tiny paper piece(s) that may be stuck, or other debris. Try to clean rollers
and make sure they are dry. Keep printer unplugged for about 2 minutes and
replug and try a test print. Also make sure that you have waited long enough
for the printer to heat up before giving a print job. Finally, it could be an issue with the paper
sensor. If this is the case, you will probably have to take the printer in for
Unplug the power cord and while doing that make sure printer is powered on i mean do not turn off the printer using the power button. When you unplug the power cord than press and hold the power button for 30 seconds. Than release the power button and connect the power cord and then try to print.
I have this printer with the same problem , worked fine for 1 year, printed over 1600 pages total ( according to the built in HP program that records how many pages I printed and how many times I used the printer) then it stopped printing. The ink cartridges are new, the software is fine, and it says ink levels are good. It physically goes through the motions of printing, loads the paper, makes all the normal sounds it used to and pushes out the paper when it's done - but the page is blank. I did some surfing and read some info that some HP printers are pre-programmed to stop certain functions so you buy a new printer. I know that might sound crazy. How long have you had the printer and how many pages do you think you printed?