Question about Verilink Wansuite 5130 (1100003) Modem

Open Question

Verilink 5160/5130 WANsuite

Customer has (verilink 5160/5130 WANsuite DSC/CSU).Customer want to split channel for ( T1 circuit)voice/data.channel 1-15 voice/16-24 data.Cutomer has a (CS1000e) nortel switch with a (TMDI card).Customer needs to know how connect from CS1000e to DSC/CSU.also from T1 circuit to back of DSU/CSU.also need programing of this verilink to make this work,The central office is sending (ESF/B8S).

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would like to know if this is a Voice/Data/Fax Modem?


This a voice/Data/Fax/ Modem. I was using it on windows xp, but does not seem to work on windows &
Voice/Data/Fax Modem

Jan 04, 2014 | Dell Bcm94154m Dell/inspiron 56k Mdc Modem...

Tip

Number of other users on the network


<b>Connection speeds</b> will decrease during peak hours on the <b>mobile network</b>. When you connect using a <b>wireless broadband</b> service using the shared data. This means that even if the data is secure "tunnel" network which is also used by other people. As more people go online and download to the tube, the speed of each user is reduced. It 'similar to the difference between driving on the freeway at 2 am against eighteen.<br /> <br /> Strange as it may seem, the number of customers to make voice calls will also affect speed. This is because customers have priority over customers of voice and<b> data network</b> and customers during busy periods with voice services are allowed to access the network before the customer data.<br /> <br /> In general, the busiest <b>mobile broadband</b> are schedule 6:00 p.m. to 11:00 - Meanwhile, you find your speed is much slower than first thing in the morning.

on Jan 11, 2011 | Modems

1 Answer

I have a problem with a Mitel sx2000 PBX which seams to be causing our line supplier problems. They say it is showing slips on the line and we need to have the clock set to theres and not the internal...


Your DSU/CUS can set clocking/timing from the local central office (CO) or internal.
There are MANY external DSU/CSU in the market.
Example: Adtran and Lucent


Please reply with what type of T1 DSU/CSU is connected to your unit.
==== If your setup does not use an external DSU/CSU then look for setting for your internal T1 card.

Are all cards on the same rack?
Grounded?


Jan 05, 2011 | Mitel SX200 480 Port T1 Adaptor...

1 Answer

DFM 562IS (DFM-562IS) Modem: SIR PLEASE SEND ME ITS ALL FEATURES.......


Product ID 3409 Brand D-LINK Vendor Code DFM-562IS Description 56K V.92/V.90 Software-based PCI Modem
The DFM-562IS is a software modem card. It plugs into a PCI expansion bus slot of a desktop PC. It supports voice, fax and data transmission/reception. It's a high-performance CONEXANT-based modem card, and can be used to connect to the Internet, and for fax and voice communication.

Key Features
High speed External Data/Fax/Voice
Plug and Play Installation
ITU-T V.92/V.90/K56flex Auto Detect
Fax Mode up to 14400bps Transmission Rate
Technical Specifications
Data ITU-T V.90/V.92
K56flex
ITU-T V.34, V.32bis, V.32, V.22bis, V.22
Bell 103 & 212A
V.44, V.42bis & MNP 5 (Data compression)
V.42bis & MNP2-4 (Error correction)
V.80 (H.324 video conferencing interface)

FAX V.17 (14400bps FAX)
V.29 (9600bps FAX)
V.27ter (4800bps FAX)

Voice With voice support via sound card application
System Requirements Requires CPU with MMX support
Operating Systems:
Windows 98,
Windows ME,
Windows 2000,
Windows NT 4.0,
Windows XP
Manufacturer D-LINK Warranty 2 Year Manufacturer's return to base Link D-LINK DFM-562IS Internal PCI 56K Voice/ Data Software Modem

May 03, 2010 | Modems

2 Answers

I use the RCA model 425 modem through Media Com. My wiring for internet enters a bedroom. Now I also want to hook up a tv using this modem. A Media Com employee suggested using a splitter. Will this work...


Theoretically you can because the purpose your cable serves is a conduit for data transmissions. Just a few cautions here. Just as in any circuit, the more the wire is spliced,split, or anything that taps into it on its way . to the modem will add resistance to the line, thus it could degrade or "slow down" your signal. There is a splitter I know mediacom haves that will help with lessening this effect.

Feb 04, 2010 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

1 Answer

Mitel SX-200 D PBX generic 1003 ACD- doesn't support ISDN.


You are not going to get the ANI information you need from the current configuration, the only way to get that information is thru the use of PRI.

Apr 08, 2009 | Mitel 9109-021-000 T1 Trunk Card (24...

2 Answers

Huawei EG162G


would this call be to a landline or a pc user as the freeware skype is much more convenient for making web calls and not to mention cheaper as its free to any other skype number? if it has to be a voice call and its got to be to a land line then you will struggle with this one as the huawei is designed for data transfer and not voice?

Feb 27, 2009 | Modems

7 Answers

Modem driver


All of you who wanted DLink DFM 562-E's driver, please click the mentioned below:

DLink DFM 562-E (XP)

D Link DFM 562E (Vista)


Thank You

Sep 09, 2008 | D-Link DFM 562E (dfm-562e) Modem

1 Answer

Avaya ds1


I would call the T1 provider. Sounds like the ISDN is down.

Jun 30, 2008 | Avaya TN464F Universal DS1/PRI Interface...

Not finding what you are looking for?
Verilink Wansuite 5130 (1100003) Modem Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Verilink Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Verilink Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...