Question about Kyocera Mita FS-1030D Laser Printer

3 Answers

How to print configuration page for a Kyocera FS1030D

I need to find out the ip address of a Kyocera FS1030D

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try press and hold the green button for about 10 seconds. HOPEFULLY this will cause the printer to produce a configuration page with the details. Good luck!!

Posted on Nov 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 11 Answers

Try press and hold the green button for about 10 seconds.

Posted on Sep 27, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Are lighting the second end the third light orange on the fs 1030d. Whati is ? Thanks

Posted on Mar 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set ip address for kyocera 1320d


Print a Status Page by pressing the green button for about 5 secs. Check the IP Address on the Status Page. If the IP Address is similar to your local network, you type that IP Address in an internet browser to open the Command Center (web interface).
If it is not similar, then you can change PC's IP to be similar to printer and via the command center, you change the printer's IP to a desired IP (similar to your local network) and restore then the IP of the PC to the one before.

Aug 21, 2014 | Kyocera FS-1320D

1 Answer

How to change your computer ip address so it matches the printer so it can print


go to printers devices ,right click on icon for 2050, click on printer properties, then click on portd , then click on configure port
enter correct ip address on bottom ip position.this should fix the problem

Dec 12, 2013 | Kyocera CS-2050 Black and White Copier

2 Answers

Wireless does not seem to work any suggestios


Go to HP Wireless Printing Center.


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 26, 2010 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Kyocera 3035 will not print - NIC card red LED flashing


First turn the main Power Switch off, then unplug the network cable from the nic card and leave it unplugged. Then turn the machine back on, when it says ready to copy, press the printer button and print out a network status page. Then hook the network cable back up and go to a pc and click on start then control panel and look for printers and faxes and click on it, then right click on the Kyocera Printer Icon, then click on properties in the drop down then click on the port tab, then click on configure port and check the ip address and make sure it matches the one on the network status page, if it doesn't put in the correct IP Address and apply the change. But if the ip address is right just try printing again. If it prints ok then you are done but if it doesn't try this click on start then run and then type in cmd, then on the screen that opens up type in ping, then a space, then ip address of the Kyocera Machine then press enter, if the Nic card is connecting to the network you should get a reply from the Kyocera's Nic Card if you do then the Nic Card is ok and the Kyocera print driver may have to be deleted and then re-installed. Hope this helps.

Aug 06, 2009 | Kyocera Mita KM-3035 All-In-One Laser...

1 Answer

How to wirelessly print to HP 2410v Photosmart printer


This is the official how-to for network setup from HP:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00781863&lc=en&dlc=&cc=us&product=303759&lang=

Introduction Print the network configuration page and obtain the IP address, subnet mask, and default gateway address for the printer. Printing the network configuration page
  1. Press the Setup button.
  2. Press the arrow buttons to select Network and then press OK .
  3. Press the arrow buttons to select Print Network Configuration Page and then press OK . The Network Configuration Page prints.
Obtaining the IP address, subnet mask, and default gateway address The IP address, subnet mask, and default gateway address are printed on the Network Configuration Page


The manual link is here:
http://h10032.www1.hp.com/ctg/Manual/bpu70241.pdf


Hope this helps:

WizardRepair

Jul 18, 2009 | HP Printers & Copiers

1 Answer

How do I install a KM-2050 wireless connection on my computer


1. need to get the IP address of the printer, print a configuration page from the printer and that should have it on it

2. open up the add a printer wizard and for the port you need to create a new tcp/ip port with the ip address of the printer

3. you need to have the drivers available on your computer to complete the addition of the printer

let me know if you need clarification on any of these steps

Feb 17, 2009 | Kyocera Mita KM-5035 Printer

2 Answers

Problem scanning to PC.


Scanner needs:
1- a second ethernet cable and its own IP address.
IP address should be similar to the printer.
2- a folder in PC ie: C:\SCANS. This folder should be input in scanner web page (entered in the address bar of a browser ie 192.168.1.10)
3- Install the file utility resident program in PC.

Feb 05, 2009 | Kyocera Copystar CS-5035 Copier

1 Answer

I need to change the IP address on my hp color laser jet 2840 coud you help me with that


Hi,
Most HP printers can be reset to factory defaults (or cold-reset ) by turning the printer off and holding down the Online or Go button while turning the printer back on. The printer control panel display should read "Cold Reset" or "Restoring Factory Settings" or something like these lines. This will remove any IP address that the printer had previously.
When you plug it in, your router should have assigned an ip address automatically. Go into your router and look at the attached devices and it will show you what ip address has been assigned to each device on your network.

Use Web Interface or Manually Assign an IP address NOTE: Network HP Printers allow you to manage them via Internet Explorer. You can enter the IP address that the printer currently has and access its configuration settings. This assumes that the web interface hasn't been locked.
NOTE: We recommend that you install the latest version of Sun's Java software before trying these steps. See this How To: How to Update Sun's Java 2 Runtime Environment Plug-in.
  1. Print the Configuration page if needed. You will be entering the "current" IP Address.
  2. Open Internet Explorer. Delete EVERYTHING from the Address line.
  3. Enter the IP Address in the Address line and press Enter.
  4. You should then connect to the printer. If this fail, go to the next section to assign the IP address manually.

    NOTE: There are 2 basics versions of the web interface. Type 1 is on newer printers. Type 2 is on older models

  5. Type 1: Click the Networking tab.
    Type 2: Click the Administration button. Click the Configuration tab.

  6. Edit the IP address, Subnet Mask, and Gateway as needed.
  7. Do not change any other fields.
  8. Scroll to the bottom and click Apply. Click OK.
  9. Close Internet Explorer.
  10. Restart the Printer. Print the Configuration page to see if number was set.
NOTE: If the above steps do not allow you to assign the IP address via the Wizard, you will need to do it through at the printer itself.
  1. Go to this HP Support Page.

    Configuring TCP/IP through the Front Control Panel

  2. Click the link to your printer model. Highlight these steps.
  3. From the File menu choose Print. In the Page Range section, click Selection. Click Print.

    Note: For the complete printer user guide, go to the HP Printers Support & Troubleshooting page. Locate your specific printer type and model. On its home page, under self-help resources, click the manuals link. Download the printer's User Guide (not the Getting Started Guide). Look for steps to manually configure TCP/IP parameters from the printer control panel.

  4. Follow the steps from the printout to assign the desired IP Address to the printer.

    IP address will be entered at the IP BYTE prompt
    Subnet mask is entered at SM BYTE prompt
    Gateway address is entered at GW BYTE prompt

    Note: The syslog server IP address (LG BYTE 1=) and timeout (TIMEOUT=) do not need configured.

  5. Once the IP Address is entered, restart the Printer. Print the Configuration page to see if number was set.

Hope this helps

Chris (ziraffa)

Jan 09, 2009 | HP LaserJet 2840 Printer

1 Answer

How do I set the IP address on my HP 8150


1. Launch your web browser.
2. In the Address: or Go to: field, type the IP address assigned to the
printer (for example: http://192.168.1.1) or the host name (for example:
http://myprinter).
If you do not know the IP address for the printer, it is listed on the
printer configuration page under Protocol Information in the TCP/IP
section.
To print a configuration page:
a. On the printer control panel, press Menu until INFORMATION
MENU displays.
b. Press Item until PRINT CONFIGURATION displays.
c. Press Select to print the configuration page. After the process is
completed, the printer will return to the READY state.

From there, you can configure the printer using the web GUI. Consult the manual if you need at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/bpl10150/bpl10150.pdf



Hope this helps, and have a good weeked.

Dec 12, 2008 | HP LaserJet 8150 Printer

1 Answer

Scanner password


HI there try the following.
  • Open Internet Explorer
  • Type in the address bar the IP address of the scanner (If you do not know this print out a status page)
  • Once you have typed in the IP address you will then have the scanner configuration screen on the left you should have passwords section you will be able to change it from there.
Hope this helps you
Thanks J

Jan 14, 2008 | Kyocera CS-2550 Black and White Copier

Not finding what you are looking for?
Kyocera Mita FS-1030D Laser Printer Logo

6,634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Printers & Copiers Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Henry Gertcher

Level 2 Expert

46 Answers

Kevin Cole

Level 1 Expert

45 Answers

Are you a Kyocera Mita Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...