Question about RCA P52926 52" Rear Projection Television

1 Answer

Unuseable signal I bought a RCA 46" LCD television in May 2008 and all of a sudden the screen went black and a message pops up on the screen "unuseable signal" and it moves around like the windows screensaver does I can not get the tv to work on cable so i called the cable company and they couldnt find anything wrong on their end so i hooked up another tv on the cable and it works Can anyone help me in this matter . sure would appreciate it Thanks alot

Posted by on

  • andrewiebe Mar 02, 2009

    rca model l42wd22 lost its signal, dvd wont work under vid1 and vid 2. I hookup cable to my other tv and there was nothing wrong with my cable tv. I unplug the tv to reset, nothing change.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers

WHAT HAPPENS WHEN YOU USE A DVD INPUT (AV) OR A SAT/CABLE BOX CONNECTED TO THE AV INPUT'S ,,IF IT CLEARS UP YOU HAVE A SIGNAL BOARD BAD BUUUUUUT YOU CAN BYPASS THAT BOARD AND SAVE MONEY JUST BY USING THE AV INPUT...TUNICA

Posted on Oct 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the model D52W19. I have two TVs in the house one works fine and this RCA model is a problem. The set usually turns on OK, then it begins to snap and pop. The screen will go black for either a few...


the small signal board would be suspect on that model. Depending on the bar code number which is on the small signal boards sticker you may find a replacement board at www.tvrepairworld.com for your model.

Aug 31, 2011 | RCA D52W19 52" Rear Projection Television

1 Answer

All of a sudden the screen went light blue. The


Hmmmm! I would have to say you have a problem with the signal board. I have not repaired this brand or model. This would be the first thing to investigate. It is the board that contains all your antenna and rca jacks. Good Luck and visit your TV tech with this info!

Jun 30, 2010 | Samsung HLP4663W 46" Rear Projection HDTV

2 Answers

L46wd22 rca 46" flat screen


ok....i know what is wrong with your set.. it is a small (very small micro fuse. rca has issued bulliten to service centers on the problem.. getting the fuse and describing where it is then soldering might be the difficult problem here.. but let me give it a try. it is located on the main signal board in a shelded covered board called the main signal board. The fuse, 1C33,is located approximately 2 inches behing the tuner The surface mounted part has various markings on
the original part from “105” to “F”
and is located below the board marking “7C32'
Replacement fuse #275819 can be placed directly over the top and soldered to the ends of the existing fuse
to lessen the chances of damaging the board traces.
all that being said.. this is some trick soldering.. and unless your a tech i would not recomend such a repair.. i cant speak for all shops but such a repair is not that difficult for most techs and cost about 125 to 200. So good luck and let me know how it go's or if i can give any more detailed info

Jun 10, 2008 | RCA HD65W140 65" Rear Projection...

1 Answer

61" RCA Projection TV, no picture, "unusable signal" message


Read the suggestion of unplugging the TV for at least 4 hours to re-set to factory specs and that took care of it!

Apr 03, 2008 | RCA HD61LPW165 61" Projection HDTV

1 Answer

"UNUSABLE SIGNAL"


l have a 42 in tv rca connected from a direct satellite and i have no picture or sound tryed different connecters only black screen with unsable signal

Jan 07, 2008 | RCA HD65W140 65" Rear Projection...

1 Answer

Unusable signal


Could be a bad buffer/amp or bad tuner, depending on source selected....accordianman

Dec 08, 2007 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

Won't turn on


tv chassis ctc 195 , hvt transformer, digital conv, power supply,

Dec 04, 2007 | RCA P46921 46" Rear Projection Television

Not finding what you are looking for?
RCA P52926 52" Rear Projection Television Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...