Service required for EPSON STYLUS R230

Parts inside your printer are at the end of their service life. See your printer documentation.

service required

Your printer needs to be serviced. Contact a Epson printer technician.

Take care!
damnor01

This is warning you that the parts inside the printer are nearing end of life. To bypass do the following.
Use the printer buttons to reset the printer by pressing and holding the "Stop", "Maintenance", and "Power" buttons all at the same time.

Probably need to have the ink pads replaced in your printer, I would call Epson for support.

You need to reset your printer. Google search for "indoreset for r230", that is the program you will need to use to reset your printer.
Kindly check my other post regarding the same problem for more info.
Goodluck.

Epson programmed their printer to monitor the waste ink counter and your printer has reached the maximum value allowed, you have to reset your printer to clear the waste ink counter.

You may read the information regarding "end of life" and "waste ink counter" here: http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp

To reset the counter, download re-setter program here, install and follow the instruction in the web site.

Good luck and thank you for using FixYa.

parts inside your printer are near the end of their service life. This is message is coming, how can i do this problem, please tell me

Reset the waste ink counter!
Assuming you have completed your modification you can reset your printers waste counter using this method (I did this and it worked on the CX6400) can't guarantee it works on all)
1. You will see big button on your printer like power on (this is on the left
2. side), black & white photocopy, color photocopy, and then the stop button (these are on the right side).
3. first turn off your printer
4. push the b/w + color + stop buttons together and hold
5. push the power on button and hold (so you'll now be holding down 4 buttons together)
6. Don't release all the buttons until you see the light indicator is blinking and then a message display on the lcd
7. release all the buttons
8. push the color button (once)
9. turn off the printer
10. turn it on again
After this one may need to reload the printer driver and locate the printer!

Parts inside your printer are near the end of their service life. See your printer documentation.