Question about Microsoft Xbox 360 Console

1 Answer

Rrod how do u fix it tv screens blank comes on and off all the time

I thought maybe the cords as the tv screen is blank and when we use the remote to turn it on and off a couple of times it eventually comes on but at the beginning it will freeze up sometimes on the tv screen.and the darn red ring keeps appearing..Any help would be greatly appreciated....thanks Leigh....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Send it in to microsoft

Posted on Jun 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having issues setting up the PS4 can't find the hdmi slot same size as the hdmi wire that comes with the console. Hdmi wire and tv shown in pic


  • Connect the included HDMI cable to your TV and the PS4's HDMI Out port Connect your console to your cable or satellite box Unplug the existing HDMI cable connecting your cable or satellite box to the TV and plug it into the PS4's HDMI In port Plug the PS4 into a power source Power on the PS4 Plug the controller into the PS4 using the included Micro USB cable Press the PS button on the controller to pair it with your PS4

Jan 10, 2017 | The Video Game Consoles & Games

1 Answer

Won't display games in 1080p on PS3


Being Sharp authorized dealer for past 11 yrs. it is one of two problems. 1- Get updated software from Sharp Online. 2- The T-con or otherwise known as controller board has a defect. This board controls all resolution lines and formats down to pixels on your screen. Let me tell you we have a box with several hundred of these boards with various defects all associated to picture and resolution problems. let me know what you find.... EXPERT-TECH@LIVE.COM

Mar 17, 2014 | Video Game Consoles & Games

1 Answer

Nes displays solid blue screen after i installed new 72 pin connector


Try cleaning the game packs out with qutips and rubbing alcohol too and the game port is dirty too try cleaning the game port out with compressed air cans.

Jul 23, 2012 | Nintendo NES Console

30 Answers

My sons leapPad screen is cracked can i get it fixed or do i have to buy a new one


Hi, you can purchase on amazon Amazon com leappad screen replacement If can't find exact part, contact any vendor (probably someone can provide parts) Hope this was helpful.

Dec 27, 2011 | Video Game Consoles & Games

5 Answers

Sys_no_graphics


for vista users and x64 users you need to right click the shortcut and select compatibility set the compatibility to windows xp and under settings check run in 640x480 screen resolution then ok back to the desktop. once the game lauches you can change the res back to whatever you want ok hope this helps GRUBBTEKK FOREVER

Jan 08, 2009 | Video Game Consoles & Games

10 Answers

PS3 cant go online with Belkin N1 wireless router


I have exactly the same issue as some of you above. As soon as I start my PS3 I manage to log onto the network for anywhere between 2 seconds and 2 minutes before I get the dreaded 80710102 error and have to reboot the PS3 to reconnect. I wrote to Belkin tech support and got the following reply... I Haven't tried it yet so don't know if it really works but thought I'd post it up here in case it helps anyone else out...

Hi Antony,

Thank you for contacting Belkin Technical Support.

We understand that the router does not support PS3. We apologize for the inconvenience caused.

A) To isolate the problem, please follow the steps given below to update the firmware and configure the router:

We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.

Please download only the relevant firmware on the router from the link given below. The firmware file would be according to the router version:

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8635uk4A&aid=14489&scid=0

and save it to the computer.

- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.

Please follow the steps given below for configuring the router:

- Disconnect the computer from your Modem provided by your "Internet Service Provider" (ISP) if it is connected to the computer.

- Reset the router to "Factory Defaults". The reset button is found at the back of the router. The reset procedure is,

- Unplug the power cable and then plug it back again. Wait for 5 seconds.
- Locate the reset button (inside a hole) at the back of the router.
- Hold down the reset button till the power-light turns solid, and then release it.

- Connect the router to either the telephone line or the filter.

- Connect the computer to port number 1 of the router.

- Make sure the corresponding lights are lit. The telephone light should be ON and solid.

- Make sure your computer has a valid IP address by following the steps given below.

1. Click on “Start” -> “Run” -> and type “CMD” and click “OK”.
2. Type “ipconfig” in the black window and check the IP address.
3. It should be in the range of 192.168.2.x, where “x” ranges from 2 to 254.

- If it is not a valid IP Address, please assign a static IP address, "Subnet Mask", “Default Gateway" and "DNS Addresses" in the computer by referring to the link below.

http://web.belkin.com/support/kb/kb.asp?a=2824

- Please reset the Internet Explorer browser settings by following the steps below.

- Open Internet Explorer. Click on “Tools” -> “Internet Options”.
- Under the General tab, click on “Delete Files” under “Temporary
Internet Files” and select "Delete all Offline content" box.
- Click on “Clear History”.
- Under the Connections tab, select “Never Dial a Connection” and
click on “LAN settings”. Uncheck all the options and click on “OK”.
- Under the Advanced tab, click on “Restore Defaults”.
- Click on “Apply” and then “OK”.

- Log on to router setup page by typing “192.168.2.1” in the address bar of the browser. By default the password is blank.

- On the left under “Internet WAN”, click on the option "Connection Type".

- Select “PPPOA”, (If it is ADSL)/ PPPOE (If it is DSL) and click on “next”.

- Type in the user-name and password and then re-type the password given to you by your ISP. Make sure you type in the full user-name.
For Example, the format for the User-name should be "yourusername@yourISP.com or .net"

- Also confirm the settings of “VPI/VCI”, “Encapsulation” values from your Internet Service Provider (ISP) and configure the same.

- Change the “MTU” to “1400”.

- Click on “Apply Changes” button at the bottom. Wait till it saves the data.

- Click on Home on the right top corner and then click on the "Connect" button. You should be able to go online.

B) Configuration of PS3:

Please contact Sony and assign static IP address and DNS on the PS3. The static IP address should be assigned in the range of the router. For example: 192.168.2.200. The IP address you assign should not be used by any other device on the network. Please confirm the ports to be opened for the PS3 from Sony.

1) Please follow the instructions given below to forward the port numbers for PS3 on the router:

- Please open the Internet Explorer and in the address bar type in "192.168.2.1" and "Enter". The computer should be connected to the router with an ethernet cable.
- Leave the password blank and click on "submit".
- Click on "Virtual server" under the "Firewall".
- Enter the port number under "Inbound port" & "Private port".
- Enter the Static IP address of the PS3 under the "Private IP address".
- Check the "Enable" box and click on "Apply changes".

2) Please follow the instructions given below to enable UpnP on the router:

- Log on to the router web interface at http://192.168.2.1
- By default, the password is blank.
- Click on System setting under "Utilities".
- Against the heading "UPNP Enabling", choose "Enable".
- Click on "Apply changes".

Note: The NAT feature on the router is enabled by default.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or Static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”. Please confirm if the router is F5D8635?
4. Using the router, if the connection is stable on all the wired and wireless computers?
5. If the PS3 works fine with other networks?
6. When does the error come up? If it comes up for both, CAT5 and CAT6 cables?

Dec 06, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...