- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To save you all the bother of replacing the usb ports, did you know that there is another usb port on the back of the console above the ethernet port, I would just use that one.
Remember thumbs up if this helps.
Try getting a universal remote and look for the "Code Search" instructions inside of the manual. It will basically make you cycle through all of the possible codes until you get the right one. Be patient and it will pay off. Don't think you can use a controller to play DVD's but I may be wrong. Let me know how it goes.
You need to have the DVD dongle that plugs into the front of the Xbox in order to play DVD's. If you do have that, any universal remote should work on it, I use a GE AllinOne universal with mine, I think the program code is 000 or 0000.
Or, if its the lock thats getting you down...
Here is the procedure to reset the parental lock code:
From the XBOX dashboard screen, go to settings and then parental control.
When prompted for the password, perform the following sequence using the XBOX controller: X, Y, Left Trigger, X.
Enter in a new password, or disable parental control entirely.
To reset the display settings of the Xbox 360 console to the default settings, follow these steps: 1.Remove any discs from the disc tray. 2.Turn the console off. 3.Turn the console on.
Note If you are using an Xbox 360 Wireless Controller, turn the console on by using the Xbox Guide button on the controller.
Note Make sure that you use the player 1 controller when you do this. The player 1 controller is the controller where the upper-left quadrant light is on.
4. As the console starts, press and hold the Y button, and then pull the right trigger at the same time. This causes the Xbox Dashboard to reset the display settings to the default settings and then automatically restarts the console.