Question about Samsung 1200W 5.1-Ch. XM-Ready Home Theater System w/5-Disc Upconvert DVD Player

1 Answer

Samsung code for a comcast cable box

I need the samsung ht512t code for a comcast motorola cable box

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The Remote w/ On Demand buttons, it's the same as the DVD player code 1932. Hit the AUX button, press and hold SETUP until AUX blinks and enter 1932. Press the power button and it should turn off the reciever.

*UNLOCKING VOLUME CONTROL* You must until your AUX volume control in order to use your Comcast remote. To do so, you must select AUX, press and hold SETUP until AUX blinks. Enter 9-9-3 and press Vol - (down). This should unlock your volume control when you select AUX. I'm not sure how to set AUX as your default setting for volume, unless you were to program your AUX device as your TV and vice versa I'd suspect.
Hope this helps!

Posted on Oct 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to get my Sony HT-CT60 Sound Bar Home Theater programmed to my GCI Cable remote?


This worked for me, but I have a Comcast Motorola DVD-R:
These are the codes for your SONY SA-CT60 Audio Device. Follow the instructions below to program your remote.
silver_with_red_ok_button-lg.gif Most likely code: 30158
Others to try: 31758, 31759
To program your Comcast remote:
  1. Turn on the TV or other device that you would like to program.
  2. Press the TV button on your remote control.
    NOTE: If you would like to program your remote control to work with a DVD Player, VCR or Audio device press the AUX button.
  3. Press and hold Setup until the red light blinks twice, then release Setup.
  4. Enter the first code for your device listed above. If you perform this procedure correctly, the red light will blink twice.
    NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 4 with a valid code.
  5. Aim the remote control at your device and press Power once (press the Play key for devices that don't have a POWER button). If the TV turns off, make sure that the VOL+/- and Mute buttons also work. If so, you're all set!
  6. If not, repeat these steps using the next manufacturer's code (you may need to try several codes to find the one that works).

Nov 24, 2012 | Sony Audio Players & Recorders

1 Answer

I'm trying to find the code to enter into my Comcast remote to turn on and off my Samsung HT-C6900W BLU-RAY home system. The ones listed in the comcast code sheet do not work.


This is not a solution - just more information. I chatted with each of Samsung, Motorola and Comcast. Each said the determination of the code was someone else's "responsibility". Comcast gave me additional codes - none worked. I tried the "learn" process for the Comcast remote. It got me half way there. It will turn my HT off, but not on - go figure. Unfortunately, I think this is just another example of Samsung building and selling stuff without being sufficiently concerned with how consumers will or can use it. Why can't anyone other than Apple figure out that these are consumer devices first and foremost?

Feb 14, 2011 | Samsung HT-C6900W Theater System

1 Answer

I need help , hooking up my samsung HT-Z410 HOME THEATER, TO MY LG HDTV, SO THAT WHEN I'M WATCHING REGULAR TV THE SOUND OF THE TV CAN COME OUT TRUE THE HOME THEATER SPEAKERS, CAN IT BE DONE? CAN A COMCAST...


first of all here is a link to the manual....http://downloadcenter.samsung.com/content/UM/200802/20080220095448484_HT-Z410-XAA.pdf and yes it can be conected thru your comcast but you wil need to buy probably cheapest at wallmart an RF Modulator (Less than 20 dollars) and from your cable box (vidieo out, or to tv) install the cable to the rf mod unit (ant in) and that converts it from coaxial cable to rca (meaning a cord with yellow ,red,white push on connectors) plug the red and white into aux input on surround system (see #3 on manual view on backside of surround unit)and and you got it.It your tv does not have a yellow vidieo connection (which is where the the yellow plug into tv)in the back then add a coaxial splitter after the comcast box so that the 1 coax line goes to tv and the other coax goes to the rf mod then thru RCA cables to the surround sound.you may need to buy xtra cables but they are cheap. hope i helped........you may try asking family or friends for the above equipment i described.the newer tv's dont need it and many people have this stuff layen around...good look

Jan 18, 2011 | Samsung 1000W 5.1-Ch. Home Theater System...

1 Answer

How do i program bose 321 remote to work with comcast box


look at your cable box and see what company actually manufactures the box. Mine was Motorola.

Mar 11, 2010 | Bose 3·2·1 GS II System

1 Answer

How to connect tv to comcast cable box


If you only have the comcast receiver and a TV, take the input (wire from outside the house or outlet on wall) and screw that onto the input of the comcast receiver. Take another wire (or RCA, component connecters or whatever means the box and TV provides) and go from the output of comcast receiver to the input of the TV. Set the TV input mode (on the TV itself or by the remote) to whatever mode you hooked up the cables to (video 1, aux, video 2, etc) and you should see a picture. From there use the comcast remote to change channel. If you use the round cable (rg56 or rg59) you will not need any other connections between the TV and the box. The video and audio are broadcast on the same line. If you use RCA (yellow red white) connectors, yellow is video, white and red are audio) you will need all three wires from comcast receiver to TV. I hope this helps and good luck!
cabc32d.png

Nov 18, 2009 | Audio Players & Recorders

1 Answer

We bought a Samsung Soundbar x810 but the Subwoofer does not seem to be working properly although the blue and red led light up. I have tried rebooting/resetting per user manual instructions but it still...


Purchased a x810 & everything tests out fine except TV signal sounds from cable box. We have the Comcast cable box connected to the 50" Samsung Plasma TV hooked up to Samsung x810 Soundbar all using HDMI cables. But we are not getting cable shows sound through Soundbar. Please advise

Nov 04, 2009 | Samsung HT-X810T Theater System

2 Answers

Connect lifestyle 48 to plasma and dvr


You need to buy a Bose VS 2, video enhancer. Your cable/sattelite, vcr and aux connect to the VS 2 and the VS2 connects one HDMI cable to the TV. The VS2 then upconverts DVDs played on the lifestyle through the VS2/HDMI.

Sep 10, 2009 | Bose Lifestyle 48 System

1 Answer

Phillips HTS3566D Home Theater/Comcast DVR 3 Device remote


I have the same problem. The only time that I can get it to work is whenever I turn on the cable box the home theater system turns on too. When I use the DVR it will turn it on too and want to play the CD/DVD. I have a Comcast Motorola DCH3416 DVR box.

Apr 03, 2009 | Philips HTS3544/37 Theater System

2 Answers

Sony Bravia Dav-HDX279W and comcast HDTV Cable box connection.


Like above, use an optical connection (need fiber optic cable) or a coaxial connection (single RCA cable). HDMI might also work, but I personally haven't checked. Connect the audio outs from the cable box to the audio ins on the home theater. The TV will only need a video connection from the cable box, as well as one from the home theater (for DVDs, onscreen menus).

This discussion can help you set up the universal remote.

Nov 18, 2008 | Sony BRAVIA DAV-HDX267W Theater System...

3 Answers

CORRECT SETUP CODE FOR RECEIVER


Originally Posted by 3FingeredGlove viewpost.gif We can make this work. You didn't mention which setup code you're using, or explicitly say whether the OK/Select button is red or gray (the manual you're using is for gray), so these are somewhat generic instructions. Should work, though. This will provide a power toggle function to the Power key.

Use red numbers for the red OK/Select button remote, grey numbers for grey button remtoes.
Temporarily assign setup code 30842 or 0842 to AUX
1) Tap AUX
2) Press Setup until 2 blinks
3) Enter 30842 or 0842The remote should blink twice

Assign NEC1 IR protocol device 210, subdevice 108, function number 203 to Power (you don't need to understand these numbers)
1) Press Setup until 2 blinks
2) Enter 994 (2 blinks)
3) Tap Setup
4) Enter 00051
5) Tap Power (not All On)
The remote should blink twice

Assign setup code 30135 or 0135 to AUX (this is NEC1, 210.109)
1) Tap AUX
2) Press Setup until 2 blinks
3) Enter 30135 or 0135
The remote should blink twice

Nov 15, 2007 | Onkyo HT-SR800 System

Not finding what you are looking for?
Samsung 1200W 5.1-Ch. XM-Ready Home Theater System w/5-Disc Upconvert DVD Player Logo

1,350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...