Question about Televison & Video

1 Answer

Everything works but looks animated with green and red

All words and letters look 3-d somebody said decaug i dont know the words on the top and bottom of the screen are curved towards the middle and the red green and blue look 3d. Can u help me?

Posted by on

  • repa
    repa Sep 25, 2008

    magnavox 51mp3964h

  • repa
    repa Sep 26, 2008

    Yes i can read a meter and can also solder.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

Sounds like a classic case of a convergence problem. If you give me a model number and a manufacture i can help your further.

Thanks
Tim Nolan

Posted on Sep 24, 2008

  • experttv
    experttv Sep 25, 2008

    Ok, yes you have a convergence problem, if you want to fix this yourself you will need to be able to use a mtere and solder very well. If you chose to have it repaired by a professional the repair should run you $300-$500. Do you know how to solder and use a meter? if so i can help you further!



    Tim Nolan

  • experttv
    experttv Sep 26, 2008

    You need to change the convergence output ic's they are part number stk392-110. then you need to check all the resistors around them and see if any are open. If you find some open let me know and i will get you the values. Good lukc and if you have any more questions please ask!



    Tim nolan

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my ps3 console dont want to work?


Go to youtube and look up how to manually take out a stuck cd. After the cd is out, the system should work fine again.

Jun 02, 2014 | Sony Playstation 3 (PS3) Console

1 Answer

Magnavox tv model 51mp392h/17 words on the bottom are double one set is red other set is green


Thats caused by failed convergence ICs and the 6.8 ohm resistors. You can get the repair kit called the DPTV305 -DPTV345 & MAG01 chassis convergence repair kit which fits your model. The kit has the components and the CD with repair instructions and its available at the following link top of the page. http://tvrepairworld.com/phillips__magnavox_repair_kits

Apr 09, 2013 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Samsung HCN4727W Rear Projection TV, green screen, audio works


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai2_bing.gif,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 10, 2009 | Samsung HL-R4667W Rear Projection...

1 Answer

RCA D52W19 replaced flyback & #150 cap


Adjust the focus on the red CRT slightly that should take care of the issue. The focus controls are located behind the lower front panel and the secondary access panel. Its a rectangle box about the size of a pack of cigarettes it has 6 dials on it 3 for the focus and 3 for the screens.

Mar 08, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

HI! I was cleaning the inside of my e-machine W3502 and I putted off the 3 cords labeled Power LED green in color,HDD.LED red in color, and the POWER SW. Now i don't know how to put them back on in order....


look on the motherboard where all the cables are plugged in, It should list on the board in small letters what plugs in there. whats written on top goes on the top pins & bottom list should be the bottom pins.

Jan 14, 2009 | E-Machines eMachines Desktop PC

2 Answers

Double Letters-One in Green other Red in bottom corner


yes goto menue and goto convergence
line up all red blue and green cross hairs so thay are wite.
thanks.
daniel

Jan 13, 2009 | Akai PT4799HD Rear Projection Television

1 Answer

Everything works but looks animated with green and red


Hello tsw4,

This sounds like a convergence problem. could you post a picture and I can give you a better diagnosis.

Thank you,

Shuttle83

Aug 24, 2008 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Easy share 5300


my pictures come out with green tint. my biggest problem is when i go to word and type a letter it prints out all to the right of the page and words go off the page. i tried to set the margins and everything. please help

Dec 20, 2007 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...