Question about Hitachi Televison & Video

1 Answer

Have a 50" tv mfg 1993 model # 50UX15K SERIAL #U3J004554 THE PICTURE WONT HOLD IN IT CONSTANTLY JUMPS BUT I DON'T KNOW WHERE THE VERTICAL HOLD IS . PICTURE IS STILL VERY CLEAR.. THANK YOU

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

You need to solder the bottom of the vertical output IC, this develops bad connections over the years and can cause your problem. There are other things that can cause it but this would be my best guess. IF you know how to solder and would like to try this yourself you can email me pictures of the boards inside the tv and I will circle the ic i need you to solder and the set should be fixed after that!

Let me know!
Tim Nolan
experttv@comcast.net

Posted on Sep 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vertical hold


no vertical hold control on the model listed here.

May 28, 2012 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

When i turn my mitsubishi tv on the picture jumps it a 1993 big screen.


it needs either the pip module bypassed because the pip board is no longer available, or vertical capacitors or connections, very common complaints.

Aug 31, 2009 | Mitsubishi WS-55511 55" Rear Projection...

3 Answers

Projection tv no picture has sound no picture


Try resoldering the vertical output IC. The crts may be blanking due to vertical deflection dropping out.

Apr 25, 2008 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

TV screen jumps and rolls, sometimes won't stay on


Try Re-soldering the vertical yoke connection and the vertical output IC. Thats a common problem in that model.

Feb 26, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Mitsubishi VS-4506R No vertical hold


Rolling picture

had a few with bad capacitors

Picture of bad caps
http://www.auctioncreations.com/wd62525a.JPG

Feb 07, 2008 | Televison & Video

1 Answer

Vertical black lines rear projection


Please provide exact model from back of tv........
Possible vertical IC circuit problem===bad caps? IC?
...........T.

Nov 01, 2007 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

55IN TV.


1. VERTICAL ROLLING, VERTICAL BLANKING BAR LOCKING IN THE MIDDLE OF THE PICTURE, ALSO MAY HAVE HORIZONTAL PULLING OR TEARING. CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF Q2C51 ON THE SIGNAL PCB. 2. CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01

Oct 31, 2007 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

Picture has horiz. lines


There is no vertical hold in the tv circuits now adays. You may find a vertical center or a vertical height. Your problem sounds like (if it has PIP Thats Picture in Picture) its in the PIP module and its a small module that stands up and most models of Mistubishi this module is no longer availabvle. The problem with the module is the small pana caps are leaking and ruins the PC traces. I have heard that theres a kit available on E-Bay to jump out this module. Now if its not the PIP model then it could be a few capacitors in the vertical sweep circuit. Also the B+ feed off the Flyback that supplies voltage to the vertical output IC could have a bad or leaky capacitor in the circuit. If your not a tech or solid state troubleshooter theres not much you can do and SHOULD take this set in to a repair center. Good Luck

May 21, 2006 | Mitsubishi VS-45605 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...