Question about Digital Cameras

Open Question

Fuji s3 pro

i'm getting an error message on top lcd display

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: s3 pro and studio flash

I have Fuji S3 pro and One body locked up during a reception and ERR displayed. 1st i turn off and on . it is work ok. 2nd time it happen again and still show ERR on dispayed. no way to reset. my camera out of warranty. estimate cost for repair 400$ per manifacture.

Posted on Jan 10, 2008

  • 1 Answer

SOURCE: Fuji Finepix S2 Pro

i had an error with Fuji s2pro when i turn it one it give me error plz i need help

Posted on Dec 15, 2008

  • 2 Answers

SOURCE: Fuji S3 Pro

I had this problem yesterday. I discharged and recharged several sets of batteries and the set I had the problem with continued to with the one shot problem the other sets workrd fine.

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: Fuji FinePix S1 Pro Digital.

camera displaying FEE

Posted on Mar 08, 2010

  • 241 Answers

SOURCE: when I switch the s3 pro on, FEE is displayed in

Try setting the lens aperture to the minimum aperture.
OR: If you are using a flash, the flash needs to set to TTL, or the camera to either S, A or M.

Posted on Jul 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message on camera


Excellent camera perfect for weddings and people pictures, if you told me what "error message on camera" said i might be able to help you out.

Dec 25, 2010 | Fuji FinePix S3 Pro Digital Camera

1 Answer

When I switch the s3 pro on, FEE is displayed in the top LCD panel. What does this mean?


Try setting the lens aperture to the minimum aperture.
OR: If you are using a flash, the flash needs to set to TTL, or the camera to either S, A or M.

Jul 07, 2010 | Fuji FinePix S3 Pro Digital Camera

1 Answer

Hi, using my new ac mains adapter, the camera does not work, shows err in the top display screen, if you try to take an exposure the camera clicks, any help would be appriciated


Is it an original Fuji part, your new AC adapter?
It sound like it's not powerfull enough. The ERR error is normally related to low batteries.

Mar 21, 2010 | Fuji FinePix S3 Pro Digital Camera

1 Answer

All of a sudden my fuji s3 pro isn't recognising the memory card. why is this? the card works fine in another camera.


That's the problem. It works fine in another camera so the card is optimized for that camera. To optimize it for your Fuji S3 pro, you need to format it in the camera. This will erase it so download any pics first.

Feb 20, 2010 | Fuji FinePix S3 Pro Digital Camera

1 Answer

Display panel shows "Err"


it sounds like maybe the pins in the back of the memory car port may have gotten damaged when you did not get it in straight, I don't know of anyplace in your area to have the camera serviced, but I think it will be a costly repair.

Dec 13, 2008 | Fuji FinePix S3 Pro Digital Camera

2 Answers

Fuji FinePix S1 Pro Digital.


I strongly recommend you use a memory card reader to solve this problem.

The cause is likely a bad USB cable, USB port on the Camera, or low battery.

A USB memory card reader will work around any of those causes.


Jul 20, 2008 | Fuji FinePix S1 Pro Digital Camera

3 Answers

Fuji S3 Pro


I had this problem yesterday. I discharged and recharged several sets of batteries and the set I had the problem with continued to with the one shot problem the other sets workrd fine.

Jul 17, 2008 | Fuji FinePix S3 Pro Digital Camera

2 Answers

Fuji Finepix S2 Pro


Ensure the batteries are the correct kind and chemical makeup (yes it does make a difference!)
try using lithium or alkaline as oppose to standard =]

Otherwise there may be an issue with the camera itself, check for warranty? if it isnt under warranty, document the error message/number, consult the manual AND the support site for the manufacturer.

good luck! =]

Jun 13, 2008 | Fuji FinePix S2 Pro Digital Camera

1 Answer

S3 pro and studio flash


I have Fuji S3 pro and One body locked up during a reception and ERR displayed. 1st i turn off and on . it is work ok. 2nd time it happen again and still show ERR on dispayed. no way to reset. my camera out of warranty. estimate cost for repair 400$ per manifacture.

Dec 26, 2007 | Fuji FinePix S3 Pro Digital Camera

2 Answers

Blank lcd screen when camera is on


No solution for your first problem but it's normal that you cannot view your photo on the LCD screen before actually taking it. Due to the way a reflex camera is built, you can't have a live view on your LCD. The Fuji S3 Pro has this type of preview as also most recent camera (Nikon D300, Canon 40D...).

Dec 08, 2007 | Fuji FinePix S3 Pro Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...