Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

2 Answers

Sears garage door opener problems

When you press any remote or the wall switch, the light on the opener comes on and you can here a clink but the door does not move.

Posted by on

  • 1 more comment 
  • kapalua Sep 28, 2008

    Can open door with remote or at wall switch but cannot close. The unit flashes and clicks but door does not move.

  • Anonymous Oct 25, 2008

    The light comes on and I hear a click, but the door does not move.

  • lockmandave Oct 25, 2008

    same problem!!!!!!
    different product.craftsman #139.5992


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Exact same problem as above. Help!

Posted on Oct 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the motor reset or power connected to the motor and check the chain or screw to see if it is in a bind.

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Garage door opener wall panel light flashing


the lock is turned on. On the wall switch press and hold it for a count of 5. the light should stop blinking

Sep 26, 2016 | Garage Doors

1 Answer

I have Garage Door Opener from Sears. Wall push button & the the remote from my car open the door OK , but it does not close the door from my car (which is programmed) Wall push button close the door...


If the main light flashes 10 times when the door reverses to the open position it is a door sensor problem. Make sure the sensors are pointed at one another and the small light on each one is lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have bad sensors.

Dec 27, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

The green light on the wall switch is blinking constantly yet it works to open/close the door. The remote does not work. Any suggestions?


Press and hold the lock button on the wall control for 3 seconds. The light will stop blinking and your remotes will work.

May 19, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have a door with two buttons and remote but only


On the wall control with the flashing light press and hold the button with the lock icon for 3 seconds and release.

Jan 10, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Garage door will open with remotes, but not with the wall switch


Sure sounds like the wall control is bad. Very common problem.

Jun 12, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Sear garage door wall mount contol light keeps blinking


Hold the button with the lock icon in for 3 seconds. This should toggle the unit off vacation mode and your remotes will work.

May 31, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Garage door only opens with wall unit


a component in the wall unit is failing , that makes the conection happen when the remote signal is recieved , ( it is recieving the remote signal but not sending it out to the control circuit for the motor )

Dec 29, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...