Question about Zenith H25F36DT 25" TV

Open Question

ZENITH HOTEL TV

I am able to get into the menu of this television, but am not able to scroll up and down to activate the cable channel search.  I tried to hold down the menu and entered 9876 ENTER then I changed the 0 to a 1, this allowed me to scroll through the parental screening menu (or whatever its called) however, I still cannot do a channel search.  ALSO, when I attempt to hold down the menu button and enter 9876 ENTER nothing happens anymore for me to attempt any other settings.  Please please please help.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 236 Answers

SOURCE: TV changes channel changed before all numbers entered in remote

Possibly you're not hitting the numbers fast enough or there is a problem in the delay circuit in the microprocessor. Stargazer

Posted on Mar 03, 2007

Ad
  • 236 Answers

SOURCE: TV changes channel changed before all numbers entered in remote

Possibly you're not putting the numbers in fast enough. If you are then there maybe a problem with the microprocessor responding too quickly to commands. I've never seen this problem before, but my TV will do the same thing if I don't get the numbers in fast enough. Stargazer

Posted on Mar 10, 2007

  • 68 Answers

SOURCE: Zenith H2533Y TV Entering Service Mode

wHEN YOU GET THE MENU UP YOU HAVE TO HOLD THE MENU BUTTON DOWN UNTIL THE MENU DISAPPEARS THEN ENTER 9876 ENTER. YOU CAN ALSO JUST AUTO PROGRAM THE SET AND IT WILL COME OUT OF SERVICE MODE.



LADY TECH

Posted on Dec 31, 2007

SOURCE: Zenith H2533Y TV Entering Service Mode

I want to adjust colors setting of tv using lc863348a and 24c32.but I dont know the servicing code to enter ,please help.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I select channel 4 for cable box to work?


Channel 4 must not be an active broadcast channel in your area so you can try to fool your TV by entering 04 using the keys on your remote.

Aug 23, 2015 | Seiki Televison & Video

1 Answer

46xbr kdl hi for some reason my tv as froze on channel 44...it is set in the programs list and i cant remove it...


you could try returning in all of your channels from the main menu the tv can do this automatically but you need to select the procedure
1. click on the home button
2. scroll sideways till you reach settings
3. in settings scroll down or up and click on digital set-up (centre button of your scroll control)
4.then scroll down to, and click on digital auto tuning (centre button of your scroll control) this will activate automatic channel tuning the tv will do the rest and will wipe out old settings and retune in all channels

Jun 03, 2013 | Sony BRAVIA KDL-46XBR2 46 in. LCD HDTV

1 Answer

I need code to activate my tv and channels


You probably need to SCAN the channels.
Connect the signal source to the tv. Either cable or Antenna.
Enter the menu mode on the tv. You can do through the remote.
Scroll down to the signal source. Select the signal source you have connected to the back of set.
Scroll to SCAN in the menu.
SCAN in the channels.
Exit menu mode.
You can now watch available channels.

Feb 09, 2011 | Televison & Video

1 Answer

We have lost our digital channels on our sharp aquos. how can i get them back. ex. 5.1, 5.2, 17.1 etc


Remove the coax cable from the television
Unfortunately your digital tuner may have gone kaput. I hope not but try an init and then rescan the channels. Unplug the television. Press and hold down input and vol-. This might take two people. While holding those buttons down on the television NOT on the remote have another person plug the television in. Keep holding down on those buttons until there is a k (green) on the left side of the screen. Then release the buttons and hold down vol - and channel - until the service menu comes up on the screen and release the buttons. Scroll down once with your down arrow on your remote until you are on page 2/26 (might be 2/some other number besides 26). The press the right arrow to turn on INIT + cause on. Press enter. When the screen turns green unplug the television without powering it down or anything. When you plug it back in it will prompt you back through the setup process.

Replace the coaxial cable before completing the setup.

If you do not have this exact model number do not complete the steps above without consulting again with the correct model number because you can wipe the memory of the television if you do not complete the right choices to bring up the service menu.

Dec 04, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Channel Search


With remote, hit MENU, (use up/down arrows) & scroll to SETUP. Hit ENTER & scroll to TV. Hit ENTER & scroll to AUTO CHANNEL SEARCH. Hit ENTER & scroll to CABLE. Hit ENTER & scroll to AUTO. Hit ENTER, wait as it scans (about 5 min). Your done.

Jun 18, 2009 | Televison & Video

1 Answer

I HAVE A RCA HDTV EN-V PIC. SNOWY WITH CABLE,BUT WITH RABBIT EARS PIC.IS PERFECT NOT SURE IF I HAVE IT PROGRAMMED RIGHT. I HAD A LOANER TV HAD NO PROBLEMS.I'VE TRIED TO GET A OWNERS MANUAL FOR HELP.


your remote should have a menu button, push it and scroll down channel,then press ok,then scroll down to auto search and press ok, then it will say antenna you need to push the right arrow button,this will change now to cable and press ok that will take care of it.

Apr 20, 2009 | Televison & Video

1 Answer

We have cable and we can only get channels 2-13 the rest are just snow why?


Hi there..You'll need to go into the menu options of the TV and the scroll down to the option that list, cable, air and other options.Put it on cable and the exit the menu.You may also have to run a channel search.Hope this helps you and have a great day..

Mar 31, 2009 | Televison & Video

1 Answer

Can only get channels 1-13,can't get the cable channels


Press Menu

Scroll right to TUN (Tuner)

Scroll down to TV/CABLE

Toggle from TV to Tuner

Problem Solved

Feb 15, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

How to set up cable input on television...searching for channels


the wd52525 has 2 antenna inputs. put the cable in the bottom one first (ant1) press menu, then scroll over to antenna, the scroll to ant1 and hit enter. if none are found repeat using ant2. if none are still found then the chassis is bad or you have no signal. try the cable on another set if it works then visit www.tv-tech.com

Dec 17, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Programming channels


Hey abshee,

In order to program the channels for this TV, you'll want to press the "Menu" button on the TV itself. Once in the main menu, scroll down until you see an option called "Setup." From here, press the right arrow key to enter the submenu. Before going any further, you'll want to make sure that the tuning band is correctly set to "Air" or "Cable," which will depend on how you have your TV connected.

Once the proper input has been selected, you can then scroll down to "Auto Ch Search." If you press the right arrow key on this option, your TV will automatically search for all available channels.

If you'd like step-by-step instructions (with pictures of what you should see at any given step), I'd suggest checking out the link I've provided below to Insignia's online owner’s manual for this model:

http://www.insignia-products.com/skins/skin_1/Topics/Documents/NS-LCD22_press.pdf

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jun 19, 2008 | Televison & Video

Not finding what you are looking for?
Zenith H25F36DT 25" TV Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75452 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...