Question about Panasonic KV-S2026C Pass-Through Scanner

1 Answer

Grinding noise When we scan sometimes the scanner makes this loud grinding noise. The rollers have been cleaned and recleaned. The noise comes and goes, but it sounds like something needs oiled. Any suggestions.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

There is usually a slide type button somewhere around the outside of the scanner and it usually has a lock & unlock sybol on it. You may want to make sure that it is slid totally in the unlock position because it could be getting caught inside once in a while if the button is say half way between lock and unlock... Hope this helps...

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The scanner works but makes a grinding noise that is getting worse


Normally Canon scanners work well for long time, Change the pickup rollers for every 250,000 pages and check other rollers for every 500,000 pages. In case you have been scanning documents with quite a good amount of dust, you may need to check at an earlier interval. Replace any worn out roller. Check if the small bearings at the end of each roller is perfect. Clean thoroughly all the rollers, dont use solvents. S. Mohan, Chenna, India

Sep 10, 2010 | Canon DR 3060 Path-Through Scanner

1 Answer

Light bar seems to be jammed


If the scanner is making a loud grinding noise when switched on or when attempting to scan, check the transportation lock is in the unlocked position.

Dec 02, 2009 | Scanners

1 Answer

Scanner pulls page in to just past the bottom sensor lever


Please ensure that the rollers are clean and within its life span. (Rollers wear out and need to changed after 250,000 pages or as recommended by mfr). FAn the pages before scanning, Ensure the edge is trim with no folds or bends. The griniding noise is because the scanner has picked up more than one page.
S. Mohan. India

May 29, 2009 | Canon DR 3080C Path-Through Scanner

1 Answer

Grinding Noise in my scanner


Try cleaning the guide bar that the scanning head rides on, apply a thin film of lithium grease on the guide bar

Apr 15, 2009 | Epson Perfection V100 Flatbed Scanner

1 Answer

Grinding noise


The most common problem is that the pulley breaks, you might be able to see it through the glass. looks where the belt goes, and see if the pulley is broken.

also, some people forget to unlock the locking mechanism when the unit gets moved, the locking switch is on the side.

Apr 09, 2009 | Epson Scanners

1 Answer

Scanner making grinding noise


Please open and apply oil on roller rod as some rust have accumulated on it prohibiting it move.

Jan 01, 2008 | Canon CanoScan LiDE 30 Flatbed Scanner

1 Answer

Why does the scanner hesitate when feeding the paper through the scanner and gives a scanned double image at the top of the page?


Is there a gear grinding noise associated with this? If so, call your local dealer for service. If not:Clean all the rollers you can reach with a cloth dampened with alcohol. Check for any obstructions in the paper path like torn paper, heavy toner buildup on guide plates or the edges of the scanning glass, or any paper guides obviously loose or out of place.

Nov 20, 2007 | Canon DR-3080CII Path-Through Flatbed...

1 Answer

Noise


this is a normal thing with scanners i have read reviews about different scanners where the scaners were good prices the only downfall was the noise

Jul 03, 2007 | Panasonic KV S2026C Path-Through Scanner

Not finding what you are looking for?
Panasonic KV-S2026C Pass-Through Scanner Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Scanners Experts

yadayada
yadayada

Level 3 Expert

61272 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

562 Answers

Bob Sloan

Level 3 Expert

2013 Answers

Are you a Panasonic Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...