Question about Motorola Mobility MOTORIZR Z6tv Cellular Phone

2 Answers

My motorola Z6 sldr is locked

The phone weas locked by my daughter and she forgot the code. I have read that once the wrong code is entered more than three or five times the phone will no longer unlock with a password. Can you help me o i need to open the phone is there a test point or should I take it to Criket provider.
My e-mail adress is iespinoza2@cox.net Thank-you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can also put a secruity code by pressing the bottom right corner button.
it should be a 6 digit code
normally if it hasnt been changed after purchas it should be 1-6,
if that doesnt work, then sorry

Posted on Dec 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Definitly take it to a Criket provider and see if they can unlock it. If not then you will have to go through motorola directly.

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to unlock pin my daughter's forgot it


Peter

If she forgot Pin she can enter it wrong up to 1 times then it will reset. Data not synced to the cloud will be lost if not on SD card. You can't bypass the security.

Mark
Motorola Support

Mar 05, 2015 | Motorola Moto E Cell Phone Unlocked -...

1 Answer

Sudsidy password for t mobile motorola razar


WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola Razor ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

You can get the Correct the subsidy password at Theunlockarena.com/motorola-razor/rs13wp9/ and Unlock it easily.Follow the instructions below and unlock it step by step...

Motorola Razor Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola Razor mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola Razor mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola Razor with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola Razor is locked to.

May 15, 2012 | Motorola SLVR Cell Phones

1 Answer

How do I unlock a Motorola i680 phone


It's simple to Unlock Your Motorola I680 Model Phone from Network lock,You can use the subsidy code to unlock the Phone from Network Lock,You can get the code from here
Wickedunlock and Unlock it from Network Lock....You can follow the instructions below and Unlock it Step by step...

Motorola Brute i680 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola Brute i680 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola Brute i680 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola Brute i680 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola Brute i680 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola Brute i680 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Jul 24, 2011 | Motorola Cell Phones

1 Answer

My phone is locked , and now asked me for my Blur account username and password ....but i forgot ....i got the motorola CLIQ


Before you can attain your Motorola CLIQ's unlock code you will need the IMEI number on it. You can find the IMEI number by simply typing *#06# and hitting enter. This number is unique to all GSMphone and will help calculate your unlocking code. Once you have your unlock code you are ready to begun the Motorola unlock instructions posted below.

Here are the steps to unlock your phone:
Unlock Motorola CLIQ (SIM Unlock)

1. Reboot your Motorola CLIQ with an unaccepted SIM card in.
*If the display reads "Enter Special Code", enter the unlock code and press "OK"
*If the display does not read "Enter Special code":
2. Press and hold the * key until an entry box is displayed.
3. Type *, #, 3, 2, # and press "OK"
4. Enter your Motorola CLIQ's unlock code and press "OK."
5. Your Motorola CLIQ should now display either "Completed" or "Deleted"

Jan 01, 2011 | Motorola Mobility CLIQ Cell Phone

1 Answer

I forgot my unlock code for my motorola z6. now how do i unlock it?


Well if you are tied to a particular network all you have to do is to unlock your phone to use it any other GSM network. You can get the unlock code through online. I will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.

Dec 07, 2010 | Motorola Mobility MOTOROKR Z6 Cell Phone

2 Answers

My daughter locked my old cell phone with a 4 number code and now doesnt remember what she set it to


Try 1234, or the last 4 digits of the phone number. If this does not work
enter 000000.

If the sim is locked you will have to contact at&t for a code.

Feb 06, 2010 | Motorola Mobility RAZR V3xx Cellular Phone

2 Answers

FORGOT MY LOCK CODE CANT GET INTO MY PHONE COMPLETELY LOKED FOR LG UX260 CANT SEE NOTHING CANT MAKE CALLS NOTHING COMPLETELY LOKED LG RUMOR UX260


ENTER THE LAST 4 DIGITS OF YOUR WIRELES NUMBER. MY DAUGHTER LOCKED HER PHONE AND DIDNT KNOW THE LOCK CODE, SHE FREAKED. THE LOCK CODE IS THE LAST 4.

Nov 02, 2009 | Cell Phones

1 Answer

MY PHONE IS MOTORIZR Z6 I FORGOT MY PASSWORD


Motorolas do not have a master override. Once the code is forgotten the phone will need to be replaced. The only other option is to call Motorola and send it in for service. I'm quite sure there's a cost for this if your phone is no longer covered by the 1year warranty.

Sep 12, 2009 | Samsung SGH-e315

2 Answers

Forgot unlock code


Please try this out:

When the screen to unlock ur phone comes, please press the menu button (the round button at the centre). This should probably ask u for a security code comes up, please enter the security code, by default it is 6 zeros. Let me know whether this works ;-) It works fine with my moto L7

Feb 16, 2009 | Cell Phones

2 Answers

Forgot my security code please help for razr v3 motorola


If you want to unlock your Motorola phone to use it on another network, consider unlocking by entering a code. Code unlocking is the easiest way to remove the SIM lock of your handset. Just enter the code with the instructions below and it's unlocked. If you don't have a code yet, you can get one in my eBay store here:

How to Enter Unlock Codes on Motorola phones:

  1. Switch ON your phone with a not allowed SIM Card,
  2. Phone should show "Enter Special or Subsidy Code",
  3. Enter unlock code.
  4. Your phone is now unlocked.
WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'
It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
Note: If your phone is on a 3G network enter **057*, then another window will appear to enter the unlock code.

How to Enter Unlock Codes on all Motorola L6i & L7i:( not L6 and L7 without i )
  1. Press and hold "*" key by dialing code 787090
  2. The mobile displays: "Menu. Network"
  3. Choose 'yes' and then press OK
  4. The mobile ask you for code
  5. Enter the code for unlocking.
How to Enter Unlock Codes on all Motorola A1000 and other A models:
  1. Click on the icon Phone
  2. Enter the following keys: **057*
  3. Mobile displays "locking enter personalization"
  4. Enter the unlock code
  5. Click Ok

Feb 15, 2009 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Motorola Mobility MOTORIZR Z6tv Cellular Phone Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1059 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...